Traxxas Servo Gear Set #2070/2075

This is the replacement Gear Set for the 2070 & 2075 Servo.

FEATURES:
Complete equipment set for the Traxxas 2070 (TRAM2070) or 2075 servo

INCLUDES:
4 servo gears and bearings and guideline sheet

REQUIRES:
Setup on the 2070 or 2075 Traxxas servo

The below thing additionally sets really well with the thing being discussed.

Universal Servo Grease

This is for usage with all makers' servo equipment sets.
To usage, simply take apart servo, throughly clean all old grease off gears, and
utilize new grease sparingly during reassembly.
The grease (.1 oz) comes in a small toothpaste-like metal tube.

DEE
8.Oct.97

Often bought with the thing that you are currently reading about.

Large Servo Saver

This is a big servo saver that can be used in Traxxas automobiles or any automobile that
requires a big style servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that enable you to mount the saver
on a lot of popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise included is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the steering linkages.

Get this thing to improve the one you read about.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, enhanced nylon and is a channel-style chassis.

PACKAGE
INCLUDES: One chassis

REMARKS:
The skid plates are not included, utilize TRAC9023.

Right here is a excellent thing that many others have purchased the exact same time.

Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Length of front plate: 5 5/8"
Density of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Density of rear plate: 1/8"
Width of rear plate: 2 1/8"

INCLUDES:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Often bought with the thing that you are currently reading about.

Box, Receiver For Stmpd, Rstlr, Bandt

This is the Receiver Box for usage on the
Traxxas Stampede, Rustler, and Outlaw Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Receiver Box
One Rubber Seal
Foam Padding
Two 2.5x8mm Cap Head Screws
Two 3x10mm Cap Head Screws
Two 2.5x10mm Cap Head Screws
One Tube of Grease
Guideline sheet

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Length: 78mm (3.07")
Width: 35mm (1.4")
Height: 33mm (1.3")

Many others have bought this thing in addition to the thing that you are currently reading about.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building and construction
Black in color

INCLUDES:
One left caster block
One right caster block

REQUIRES:
Setup on Slash

SPECIFICATIONS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

This thing is frequently bought with the above pointed out thing.

Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building and construction
Black in color

INCLUDES:
Two steering blocks

REQUIRES:
Setup on steering assembly

SPECIFICATIONS:
Length: 35mm (1.38")
Width: 32mm (1.26")