Traxxas Servo Gear Set #2070/2075

This is the replacement Equipment Set for the 2070 & 2075 Servo.

FEATURES:
Total equipment set for the Traxxas 2070 (TRAM2070) or 2075 servo

CONSISTS OF:
Four servo gears and bearings and direction sheet

NEEDS:
Installation on the 2070 or 2075 Traxxas servo

The listed below product also pairs actually well with the product being reviewed.

Universal Servo Grease

This is for use with all manufacturers' servo equipment sets.
To use, merely take apart servo, throughly clean all old grease off gears, and
use new grease sparingly throughout reassembly.
The grease (.1 oz) is available in a small toothpaste-like metal tube.

DEE
8.Oct.97

Frequently gotten with the product that you are currently reviewing.

Large Servo Saver

This is a large servo saver that can be utilized in Traxxas cars or any car that
requires a large style servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that enable you to install the saver
on most popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also consisted of is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the guiding linkages.

Get this product to improve the one you read around.

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, strengthened nylon and is a channel-style chassis.

PACKAGE
CONSISTS OF: One chassis

REMARKS:
The skid plates are not consisted of, use TRAC9023.

Here is a terrific product that numerous others have actually bought at the same time.

Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made of black molded nylon
For the Traxxas Stampede

SPECS:
Length of front plate: 5 5/8"
Thickness of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Thickness of rear plate: 1/8"
Width of rear plate: 2 1/8"

CONSISTS OF:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Frequently gotten with the product that you are currently reviewing.

Box, Receiver For Stmpd, Rstlr, Bandt

This is the Receiver Box for use on the
Traxxas Stampede, Rustler, and Bandit Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Receiver Box
One Rubber Seal
Foam Cushioning
2 2.5x8mm Cap Head Screws
2 3x10mm Cap Head Screws
2 2.5x10mm Cap Head Screws
One Tube of Grease
Direction sheet

NEEDS:
Installation on the automobile

SPECS:
Length: 78mm (3.07")
Width: 35mm (1.4")
Height: 33mm (1.3")

Lots of others have actually gotten this product along with the product that you are currently reviewing.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building and construction
Black in color

CONSISTS OF:
One left caster block
One right caster block

NEEDS:
Installation on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

This product is often gotten with the above stated product.

Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building and construction
Black in color

CONSISTS OF:
2 steering blocks

NEEDS:
Installation on guiding assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")