Traxxas Servo Digital Hightorque Bb Wa

This is the Digital High Torque Servo for the Traxxas
E-Revo RTR and the Traxxas Slash

FUNCTIONS:
Plastic blue two piece water resistant case

SUCHES AS:
One Digital High Torque Servo with J style port

REQUIRES:
Installing into vehicle

SPECS:
Length: 41mm (1.6")
Width: 20mm (0.79")
Height: 42.3mm (1.67")
Torque: 125 oz-in
Speed: 0.16 sec @ 60°

Numerous others have acquired this item together with the item that you are currently checking out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly like this thing if you have the thing just above discussed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

SUCHES AS:
2 Ball Bearings

REQUIRES:
Assembly to vehicle

SPECS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are used to support the Primary Clutch (one needed).

Want an additional excellent item to match the above pointed out item?

Antenna Tube W/ Cap, Black

This is a standard replacement Antenna Tube with Cap from Dubro
This item can be used anywhere an antenna tube is had to support
a receiver antenna wire.

FEATURES:
Black plastic building and construction

SUCHES AS:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Nothing. This is a direct fit part for any boat, vehicle, and so on that utilizes
    a standard size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)

Want an additional excellent item to match the above pointed out item?

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas cars
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building and construction

SUCHES AS:
2 hex centers
Four axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These centers could be used with other cars making use of the very same
    pin/hex design. These centers Will Not deal with the T-Maxx or E-Maxx.