Traxxas Servo Digital Hightorque Bb Wa

This is the Digital High Torque Servo for the Traxxas
E-Revo RTR and the Traxxas Slash

FUNCTIONS:
Plastic blue 3 piece water resistant case

CONSISTS OF:
One Digital High Torque Servo with J design port

REQUIRES:
Installing into vehicle

SPECIFICATIONS:
Length: 41mm (1.6")
Width: 20mm (0.79")
Height: 42.3mm (1.67")
Torque: 125 oz-in
Speed: 0.16 sec @ 60°

Numerous others have bought this thing in addition to the thing that you are presently reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly love this product if you have the product earlier discussed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Primary Clutch (one required).

Want an additional excellent thing to compliment the above stated thing?

Antenna Tube W/ Cap, Black

This is a basic replacement Antenna Tube with Cap from Dubro
This product can be utilized anywhere an antenna tube is needed to support
a receiver antenna wire.

FEATURES:
Black plastic building

CONSISTS OF:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Absolutely nothing. This is a direct fit part for any boat, automobile, etc. that uses
    a basic size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)

Want an additional excellent thing to compliment the above stated thing?

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

CONSISTS OF:
Two hex centers
4 axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These centers might be utilized with other vehicles making use of the exact same
    pin/hex design. These centers Will Not deal with the T-Maxx or E-Maxx.