Traxxas Servo Case/Gaskets For 2056 And 2075 Servos

This is the replacement Servo Case and Gasket Set for the Traxxas
2056 - TRAM2026 and 2075 (we do not stock) Servos

FEATURES:
Three piece plastic case molded in blue and black color
Changes used or broken servo cases and gaskets

CONSISTS OF:
One Upper Case (blue plastic)
One Middle Case (blue plastic)
One Lower Case (black plastic)
One Upper Case Gasket
One Lower Case Gasket
One Output Shaft O-Ring
4 Case Screw O-Rings

REQUIRES:
Assembly

Want one more great item to compliment the above mentioned item?

Main Chassis (S)

This is the replacement chassis for the Traxxas Stampede truck. It is made
of black, strengthened nylon and is a channel-style chassis.

PACKAGE
CONSISTS OF: One chassis

REMARKS:
The skid plates are not included, use TRAC9023.

Right here is a great item that lots of others have actually purchased the very same time.

Skid Plates Front & Rear (S)

This is a replacement set of skid plates for the Traxxas Stampede.

FEATURES:
Made of black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Length of front plate: 5 5/8"
Density of front plate: 3/16"
Width of front plate: 2 1/8"
Length of rear plate: 4 3/8"
Density of rear plate: 1/8"
Width of rear plate: 2 1/8"

CONSISTS OF:
(1) Front skid plate
(1) Rear skid plate
MDJ 3/25/95 ¦-)

Want one more great item to compliment the above mentioned item?

Main Chassis (Grey)

This is the Main Chassis for the Traxxas Stampede XL-5.

FEATURES:
Nylon Construction
Grey in Color

CONSISTS OF:
One Grey Nylon Chassis

REQUIRES:
Installation into Vehicle

This item praises the main item here.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead utilized in lots of Traxxas vehicles.
The front suspension arm hinge pins go through this piece.

FEATURES:
Gray nylon building and construction

CONSISTS OF:
One front bulkhead

REQUIRES:
Nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is utilized on the following automobiles:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

The listed below item also pairs actually well with the item being talked about.

Large Servo Saver

This is a big servo saver that can be utilized in Traxxas cars or any vehicle that
needs a big design servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that allow you to mount the saver
on most popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for mounting the guiding linkages.

Get this item to improve the one you are reading about.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECIFICATIONS:
Height: 2 3/4"
Density: 1/4"
Width at base: 2 3/4"
Width at top: 2"

CONSISTS OF:
(1) Front shock tower for the Traxxas Stampede

Right here is one more item that praises the item being talked about.

Servo Gear Set #2070/2075

This is the replacement Gear Set for the 2070 & 2075 Servo.

FEATURES:
Complete gear set for the Traxxas 2070 (TRAM2070) or 2075 servo

CONSISTS OF:
4 servo gears and bearings and guideline sheet

REQUIRES:
Installation on the 2070 or 2075 Traxxas servo