Traxxas Rotor Blade Set, Green (2) (With Screws) - Aton

This is the Rotor Blade Set in Green for the Traxxas Aton Quadcopter.

FEATURES:
Fits the Traxxas Aton and Aton Plus
Stamped "A" and "B" to ensure proper installation
Molded plastic building

CONSISTS OF:
One each; Clockwise Rotating "A" Stamped Propeller
Counterclockwise Rotating "B" Stamped Propeller

Right here is another thing that compliments the thing being discussed.

Rotor Blade Set, Black (2) (With Screws) - Aton

This is a great enhancement to the thing currently being discussed.

5000Mah 11.1V 3-Cell 20C Lipo Battery W/ Id Plug

This is the Traxxas 11.1V 3S 5000mAh 20C LiPo Battery.

FEATURES:
Requirement replacement battery for the Traxxas Aton Plus, optional for
    the Aton
Likewise compatible with the Traxxas 1/10 scale VXL designs (Bandit VXL,
    Rustler VXL, Stampede VXL, Stampede 4x4 VXL, Slash VXL,
    Slash 4x4 VXL and Rally VXL geared up with stock gear ratio and
    tires
iD Automobile Battery Identification enables Traxxas iD geared up battery chargers to
    immediately set and optimize charge settings for particular battery

CONSISTS OF:
11.1V 3S 5000mAh 20C LiPo Battery with iD Port and Integrated
    Balance Plug

REQUIRES:
LiPo compatible charger
Charging Bag

SPECIFICATIONS:
Length: 5.3" (134mm)
Width: 1.7" (42.5mm)
Density: 1.1" (27.8mm)
Weight: 12.5oz (355g)
Continuous Discharge: 20C
Wire Lead: 12AWG Maxx Cable television

COMMENTS:
Not recommended for any Traxxas automobiles other than the ones listed
    above.

ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer or Battery charger with Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 3C
NEVER Trickle Charge
NEVER enable to Release listed below 2.5V per cell
NEVER disassemble or modify pack wiring in any method or puncture cells
NEVER put on combustible products or leave unattended during
    charging
ALWAYS Charge in a fireproof area
ALWAYS set charger's output volts to match battery volts