Traxxas Rod Ends Revo Large W/ Hollow Balls

This is the Big Rod End Set for the Traxxas Revo.

FEATURES:
Plastic building
Black in color
Metal Pivot Balls

CONSISTS OF:
12 Rod Ends
12 Pivot Balls

NEEDS:
Assembly to automobile

SPECIFICATIONS:
Length: 22mm (.88")
Width at ball joint: 10mm (.39")

Frequently bought with the thing that you are currently checking out.

Toe Link 5.0Mm Steel Frnt Or Rr (2) Revo

This is a set of replacement Toe Links for the Traxxas Revo Truck.
    These change the position of the toe on the vehicle.

FEATURES:
Steel turnbuckle design
5.0mm diameter

CONSISTS OF:
2 front or rear toe links

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 5.1" (129mm)

Want one more great thing to match the above discussed thing?

Turnbuckles Toe Links Rr 5Mm (

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx, TRAC78**.

FEATURES:
Constructed of steel, polished natural finish

CONSISTS OF:
2 Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx.

NEEDS:
Installing in between wheel centers and rear bulkheads

SPECIFICATIONS:
Length: 4.9" (125mm)
Diameter: 0.20" (5mm)

REMARKS:
Fits just the 3.3 version of the T-Maxx.

Want one more great thing to match the above discussed thing?

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Bumper
One Bumper Mount
2 3x25mm Button Cap Screws
2 4x10mm Button Cap Screws

NEEDS:
Installation on the automobile

Here is a great thing that lots of others have actually purchased the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a great thing that lots of others have actually purchased the very same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

CONSISTS OF:
2 Ball Bearings

NEEDS:
Assembly to automobile

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one required).

This thing is regularly bought with the above discussed thing.

Rod Ends (12) / Hollow Balls (12) Jato

    These are the Rod Ends and Balls for the Traxxas Jato.

FEATURES:
Black nylon construction.
Steel hollow balls.

INCLUDES:
Twelve rod end/balls

NEEDS:
Installing on Jato

SPECIFICATIONS:
Length: 1-1/8" (28mm)
Width: 3/8" (9mm)

The below thing also sets really well with the thing being discussed.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Installation on the automobile

This thing is regularly bought with the above discussed thing.



This is a optional Racers Edge Aluminum single arm servo horn, meant for use with Futaba servos. This strong aluminum servo horn is comparable in design to the Racers Edge Pro Adjustable servo horns, but includes a third linkage mounting point and does not utilize lock down screws.