Traxxas Rod Ends Long & Short

This set of rod ends, balls, and screws is used on all however 4 of Traxxas'
packages. It WILL NOT WORK ON: the Sledgehammer, initial Hawk, Cat, or Bullet.

Includes: 4 short rod ends (17mm)
16 long rod ends (19mm)
2 ball screws
18 hollow ball ports

pcd 01/23/94

Right here is a fantastic product that several others have actually bought at the very same time.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
location over the shock body and the piston heads that manage the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on most Traxxas nitro and electrical powered vehicles.
Two hole piston head for greater dampening or two hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and two lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to set up parts.

You will certainly enjoy this item if you have the item just above discussed.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

CONSISTS OF:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outdoors diameter: 7mm

This product is frequently purchased with the above discussed product.

Suspension Pins 44Mm Slash Rustler / Stampede / Bandit

This is a set of chrome suspension pins used to hold the front suspension arms
on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: two chrome suspension pins and two "E" type retaining clips.

Requires:nothing parts are a direct replacement.

Specs:3mm x 44mm pins are notched for the 3MM "E" type retaining clips at each
end. WLG 9-29-97

Regularly purchased with the product that you are presently reading about.

40Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil used with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in hot weather or thicken up in cold weather

CONSISTS OF:
One bottle of silicone oil

SPECS:
40wt (the higher the weight number the thicker the oil)
2 oz. bottle

This is a wonderful enhancement to the product presently being gone over.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Regularly purchased with the product that you are presently reading about.

Large Servo Saver

This is a big servo saver that can be used in Traxxas cars or any automobile that
requires a big design servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that enable you to install the saver
on most popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise consisted of is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the guiding linkages.