Traxxas Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building

INCLUDES:
One Diff Ring Equipment
One Pinion Equipment

REQUIRES:
Installation on the car

Often acquired with the product that you are currently checking out.

Differential Assembly, Complet

This is the Total Differential Assembly for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.
Not for use on 1/10 scale vehicles.

FEATURES:
Steel and nylon building

INCLUDES:
One Total Differential Assembly

Several others have acquired this product along with the product that you are currently checking out.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building, black in color

INCLUDES:
One Wing
One Decal Set

REQUIRES:
Installation on the car

SPECIFICATIONS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

This product praises the above talked about product.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

REQUIRES:
Installation on the car

Below is one more product that praises the product being talked about.

Cover Plates, Differential (Fr

These are the Front and Back Differential Cover Plates
for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Front and One Rear Diff Cover Plate
2 O-Rings
2 Gaskets
Two 2x14mm Button Head Screws

REQUIRES:
Installation on the car

Get this product to enhance the one you are reading about.

Shim Set For Differential, Four Shims, .324 X .409 X .005

This is the Diff Shim Set for the Associated 18T.

FUNCTIONS:
Steel building

INCLUDES:
4 shims and direction sheet

REQUIRES:
Setting up on differential shaft

SPECIFICATIONS:
Diameter: inner 8mm, outer 10mm

Several others have acquired this product along with the product that you are currently checking out.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
One Front Skidplate
One Back Skidplate
One Transmission Skid Plate
2 Guiding Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Installation on the car

This product is frequently acquired with the above discussed product.

Bulkhead, Rear (Left & Right H

This is the Back Bulkhead for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building, black in color

INCLUDES:
2 Back Bulkhead Sections
4 3 x 10mm Button Head Screws
One 2.5 x 22mm Socket Head Cap Screw

REQUIRES:
Installation on the car

Below is one more product that praises the product being talked about.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for use on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
2 front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Installation over front diff assembly

This is a wonderful enhancement to the product currently being talked about.

1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FUNCTIONS:
Nylon building
Black in color

INCLUDES:
One Wheelie Bar
One 2x14mm Cap Head Screws
Two 2x8mm Cap Head Screws
Direction Sheet

REQUIRES:
Installation at rear of chassis