Traxxas Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

SUCHES AS:
One Diff Ring Gear
One Pinion Gear

NEEDS:
Setup on the vehicle

Often gotten with the product that you are currently checking out.

Differential Assembly, Complet

This is the Total Differential Assembly for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.
Not for usage on 1/10 scale vehicles.

FEATURES:
Steel and nylon building and construction

SUCHES AS:
One Total Differential Assembly

Many others have actually gotten this product along with the product that you are currently checking out.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction, black in color

SUCHES AS:
One Wing
One Decal Set

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

This product praises the above reviewed product.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Publishes for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

SUCHES AS:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

NEEDS:
Setup on the vehicle

Here is an additional product that praises the product being reviewed.

Cover Plates, Differential (Fr

These are the Front and Rear Differential Cover Plates
for usage on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

SUCHES AS:
One Front and One Rear Diff Cover Plate
2 O-Rings
2 Gaskets
3 2x14mm Button Head Screws

NEEDS:
Setup on the vehicle

Get this product to boost the one you read around.

Shim Set For Differential, Four Shims, .324 X .409 X .005

This is the Diff Shim Set for the Associated 18T.

FUNCTIONS:
Steel building and construction

SUCHES AS:
Four shims and instruction sheet

NEEDS:
Installing on differential shaft

SPECIFICATIONS:
Diameter: inner 8mm, outer 10mm

Many others have actually gotten this product along with the product that you are currently checking out.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

SUCHES AS:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
2 Guiding Servo Guards
One Steering Servo Cover Plate

NEEDS:
Setup on the vehicle

This product is regularly gotten with the above stated product.

Bulkhead, Rear (Left & Right H

This is the Rear Bulkhead for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction, black in color

SUCHES AS:
2 Rear Bulkhead Sections
Four 3 x 10mm Button Head Screws
One 2.5 x 22mm Socket Head Cap Screw

NEEDS:
Setup on the vehicle

Here is an additional product that praises the product being reviewed.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

SUCHES AS:
2 front bulkhead halves
Four 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Setup over front diff assembly

This is a amazing enhancement to the product currently being reviewed.

1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FUNCTIONS:
Nylon building and construction
Black in color

SUCHES AS:
One Wheelie Bar
One 2x14mm Cap Head Screws
3 2x8mm Cap Head Screws
Guideline Sheet

NEEDS:
Setup at rear of chassis