Traxxas Rebuild Kit Hd Slipper Clutch

This is the Strong Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Components for both nitro and electric Revo and Maxx trucks

CONSISTS OF:
3 Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

Right here is a great product that lots of others have actually purchased the very same time.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum construction

CONSISTS OF:
One slipper pressure plate
One slipper center

NEEDS:
Setup onto vehicle.

This product is regularly bought with the above mentioned product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above reviewed product.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Equipment
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black in color
.8 metric pitch

CONSISTS OF:
One 68T 0.8 metric pitch spur gear

NEEDS:
Setup on the vehicle

SPECS:
Size: 2.16" (55mm)
Density: .23" (6mm)

You will certainly love this thing if you have the thing earlier pointed out.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Equipment
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon construction, black in color
.8 metric pitch

CONSISTS OF:
One 65T 0.8 metric pitch spur gear

NEEDS:
Setup on the vehicle

SPECS:
Size: 2.12" (54mm)
Density: .23" (6mm)

This product is regularly bought with the above mentioned product.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FUNCTIONS:
6061-T6 anodized blue aluminum construction
Steel 10x15x4mm ball bearing with blue rubber seal
Utilized on slipper shaft

CONSISTS OF:
One aluminum adapter
One 10x15x4mm ball bearing

NEEDS:
Setup on to slipper shaft
Staying clutch pieces

Want an additional great product to match the above mentioned product?



This is a pair of Pro-Line Badlands 2.8" All Terrain Tires
installed on Black Desperado Wheels.

FEATURES:
Fits the front of the 2WD Traxxas Stampede and Rustler, the back of
    the 2WD Jato, Stampede and Rustler and the front and back of the
    Traxxas Stampede 4x4
Wheels built of nylon with a molded-in beadlock ring for scale
    look, 6 spoke design
M2 medium substance Badlands 2.8" tires have motorcross style tread
    with oversize lugs for optimum efficiency in all terrain
    conditions

CONSISTS OF:
Two Pro-Line Desperado 2.8" Front Wheels in Black with Badlands M2
    Tires and Foam Inserts

SPECS:
Size: 4.95" (126mm)
Width: 2.10" (53mm)

This product praises the above reviewed product.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These might likewise be referred to as coverplate screws.