Traxxas Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock containing the shock oil.

FEATURES:
Nylon building

CONSISTS OF:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECS:
Diameter Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The below product likewise sets truly well with the product being reviewed.

Ultra Shock Body Long Grey (2)

These are the Long Shock Bodies for the Traxxas Ultra Shocks.

FEATURES:
Molded Composite
Gray in Color

CONSISTS OF:
Two ultra shock bodies (long)

REQUIRES:
Installation

SPECS:
Length: 1.45" (37mm)
Diameter: .51" (13mm)

This is a superb addition to the product presently being reviewed.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct package for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This product praises the main item right here.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and right steering blocks

REQUIRES:
5x11x4mm bearings (DTXC1547)

Get this product to enhance the one you are reading around.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES:
Helps to support axle providers and shocks
Black in color, constructed of hardened plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Attaching to chassis

REMARKS:
For the 3.3 variation only. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.

This product praises the above reviewed product.

Body Ultra Shock Xxl Grey (2)

These are the Shock Bodies for the Traxxas Ultra Shocks (TRAC3762)
utilized on the Traxxas T-Maxx 3.3.

FEATURES:
Molded Composite
Gray in Color

CONSISTS OF:
(2) Bodies

REQUIRES:
Installation

SPECS:
Length: 1.777" (45.1mm)
Diameter: 0.521" (13.2mm)

This product is often gotten with the above mentioned product.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that manage the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on the majority of Traxxas nitro and electric powered vehicles.
Two hole piston head for greater dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and two lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

You will certainly enjoy this product if you have the product earlier mentioned.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, also work well
with Associated aluminum shocks. Qty-4

Below is a terrific product that many others have actually purchased the exact same time.

Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Bandit, Stampede and Rustler.

FEATURES:
Metal building, black and silver in color

CONSISTS OF:
Two rear stub axles and pins

SPECS:
Length: 1.65" (42mm)
Diameter: .51" (13mm) at largest point