Traxxas Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon construction

CONSISTS OF:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

REQUIRES:
Other shock components

SPECS:
Diameter Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The listed below product additionally pairs truly well with the product being discussed.

Ultra Shock Body Long Grey (2)

These are the Long Shock Bodies for the Traxxas Ultra Shocks.

FEATURES:
Molded Composite
Gray in Color

CONSISTS OF:
Two ultra shock bodies (long)

REQUIRES:
Installation

SPECS:
Length: 1.45" (37mm)
Diameter: .51" (13mm)

This is a amazing enhancement to the product currently being discussed.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This product compliments the main item below.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
One left and ideal steering blocks

REQUIRES:
5x11x4mm bearings (DTXC1547)

Get this product to boost the one you read about.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Assists to support axle providers and shocks
Black in color, constructed of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Fastening to chassis

COMMENTS:
For the 3.3 variation only. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.

This product compliments the above discussed product.

Body Ultra Shock Xxl Grey (2)

These are the Shock Bodies for the Traxxas Ultra Shocks (TRAC3762)
utilized on the Traxxas T-Maxx 3.3.

FUNCTIONS:
Molded Composite
Gray in Color

CONSISTS OF:
(2) Bodies

REQUIRES:
Installation

SPECS:
Length: 1.777" (45.1mm)
Diameter: 0.521" (13.2mm)

This product is often purchased with the above mentioned product.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set contains the spring retainers that hold the springs in
place over the shock body and the piston heads that manage the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on many Traxxas nitro and electrical powered vehicles.
Two hole piston moving towards greater dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and 2 lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

You will like this item if you have the item previously pointed out.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

Below is a fantastic product that lots of others have actually bought at the same time.

Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Bandit, Stampede and Rustler.

FEATURES:
Metal construction, black and silver in color

CONSISTS OF:
Two rear stub axles and pins

SPECS:
Length: 1.65" (42mm)
Diameter: .51" (13mm) at biggest point