Traxxas Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Functions: Brass pinion gear

Consists of: 1 gear and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Gear length- 1/4" Total length- 7/16"
    Shaft diameter- 1/4" Gear diameter- 1/2"
    Installing shaft (motor shaft) 1/8"

This thing praises the above discussed thing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for models with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Lots of others have acquired this thing together with the thing that you are currently checking out.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FEATURES:
Perfect replacement part for fine tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building and construction

CONSISTS OF:
One Pinion Gear
One Set Screw

SPECS:
Teeth: 28
Pitch: 48

Want another wonderful thing to compliment the above discussed thing?

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Designed for models with a slipper clutch
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).

This thing praises the above discussed thing.

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building and construction, silver in color

CONSISTS OF:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outdoors Size: .69" (17.5mm)

This thing praises the above discussed thing.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it impossible to link backwards
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Safe favorable locking spring loaded terminals for consistent
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
Two black male plastic connectors
Two sets of gold metal pins
Direction sheet

NEEDS:
Soldering wires to the metal pins

Here is another thing that praises the thing being discussed.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Designed for models with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 76

COMMENTS:
For this slipper clutch design there is also a 86T gear (TRAC4686),
    83T gear (TRAC4683) and 90T gear (TRAC4690).