Traxxas Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Features: Brass pinion gear

Includes: 1 gear and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Equipment length- 1/4" General length- 7/16"
    Shaft diameter- 1/4" Equipment diameter- 1/2"
    Mounting shaft (motor shaft) 1/8"

This product compliments the above gone over product.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for models with a slipper clutch.
Black plastic building

SUCHES AS:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Numerous others have actually bought this product in addition to the product that you are currently reading about.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Equipment for the Traxxas 4-Tec.

FEATURES:
Ideal replacement part for great tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building

SUCHES AS:
One Pinion Equipment
One Set Screw

SPECS:
Pearly whites: 28
Pitch: 48

Want another terrific product to enhance the above discussed product?

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for models
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Created for models with a slipper clutch
Black plastic building

SUCHES AS:
One spur gear

SPECS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).

This product compliments the above gone over product.

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Equipment with Set Screw
from Traxxas.

FEATURES:
Steel building, silver in color

SUCHES AS:
One 31 Tooth, 48 Pitch Pinion Equipment
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECS:
Length: .42" (10.5mm)
Inside Diameter: 1/8"
Outside Diameter: .69" (17.5mm)

This product compliments the above gone over product.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity defense makes it difficult to connect backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protected positive locking spring loaded terminals for constant
    contact
Numerous locking barbs keep terminals protect

SUCHES AS:
2 black male plastic ports
2 sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins

Right here is another product that compliments the product being gone over.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Equipment for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Created for models with a slipper clutch.
Black plastic building

SUCHES AS:
One spur gear

SPECS:
Pitch: 48
Tooth: 76

COMMENTS:
For this slipper clutch design there is likewise a 86T gear (TRAC4686),
    83T gear (TRAC4683) and 90T gear (TRAC4690).