Traxxas Pinion Gear 48P 25T

This equipment is a steel pinion equipment in 48 pitch

Functions: Brass pinion equipment

Includes: 1 equipment and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion equipment.
    Shaft length- 3/16" Equipment length- 1/4" Total length- 7/16"
    Shaft diameter- 1/4" Equipment diameter- 1/2"
    Mounting shaft (motor shaft) 1/8"

This thing praises the above discussed thing.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Several others have acquired this thing in addition to the thing that you are presently checking out.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Equipment for the Traxxas 4-Tec.

FEATURES:
Perfect replacement part for great tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building and construction

CONSISTS OF:
One Pinion Equipment
One Set Screw

SPECIFICATIONS:
Teeth: 28
Pitch: 48

Want another wonderful thing to match the above discussed thing?

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Equipment for designs
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for designs with a slipper clutch
Black plastic building and construction

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 90

COMMENTS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 86T equipment (TRAC4686).

This thing praises the above discussed thing.

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Equipment with Set Screw
from Traxxas.

FEATURES:
Steel building and construction, silver in color

CONSISTS OF:
One 31 Tooth, 48 Pitch Pinion Equipment
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Installation

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Diameter: 1/8"
Outside Diameter: .69" (17.5mm)

This thing praises the above discussed thing.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs only (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity protection makes it impossible to connect backwards
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Secure positive locking spring loaded terminals for constant
    contact
Several locking barbs keep terminals protect

CONSISTS OF:
Two black male plastic connectors
Two sets of gold metal pins
Instruction sheet

REQUIRES:
Soldering wires to the metal pins

Right here is another thing that praises the thing being discussed.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Equipment for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur equipment

SPECIFICATIONS:
Pitch: 48
Tooth: 76

COMMENTS:
For this slipper clutch design there is also a 86T equipment (TRAC4686),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).