Traxxas Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic building and construction

INCLUDES:
Two Nerf Bars for the Traxxas Slash

REQUIRES:
Setup onto Vehicle

Right here is another item that compliments the item being talked about.

Sealed Receiver Box (Slash)

This is the Receiver Box for the 2WD Traxxas Slash Truck.

FEATURES:
Replaces damaged receiver boxes
Constructed of black plastic

INCLUDES:
One top and bottom half receiver box for the Traxxas Slash
Hardware

REQUIRES:
Setting up receiver and bolting receiver box to chassis.

This is a fantastic enhancement to the item presently being talked about.

Hold Down, Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash.

FEATURES:
Black nylon building and construction

INCLUDES:
One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Angled Body Clip

REQUIRES:
Setup on the chassis

The listed below item also sets really well with the item being talked about.

Bumper, Front/ Bumper Mount, F

This is the Front Bumper and Mount for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building and construction
Black in color

INCLUDES:
One Front bumper
One Front bumper install

REQUIRES:
Setup on chassis

Frequently bought with the item that you are presently checking out.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Long lasting steel building and construction

INCLUDES:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

REQUIRES:
Setup on the Rustler, Stampede or Outlaw

REMARKS:
For a total suspension pin set order TRAC4940

Get this item to improve the one you read around.

Suspension Arms Rear Slash 2Wd Rustler Stampede F/R Slash 4X4

This is the Left and Right Suspension Arms for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building and construction
Front or rear application

INCLUDES:
One left suspension arm
One ideal suspension arm

REQUIRES:
Setup on suspension assembly

SPECS:
Length: 100mm (3.94")
Width: 45mm (1.77")
Thickness: 11.5mm (0.45")

Right here is a wonderful item that many others have bought at the very same time.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Outlaw & Nitro Stampede.

FEATURES:
Plastic building and construction
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Outlaw
    and Nitro Stampede

REQUIRES:
Setup on the automobile

SPECS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Thickness: .27" (7mm)

This is a fantastic enhancement to the item presently being talked about.

Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FUNCTIONS:
Composite nylon building and construction
Replaces a worn or damaged bellcrank set
May also be installed on the Traxxas Rustler, Outlaw and 2WD Slash
    models (assembled in various configurations depending upon design)

INCLUDES:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
Two Servo Arms
Two Shoulder Screws
Two 3x15 Counter Sunk Machine Screws
Two Hollow Balls
Four Bushings
Instruction Sheet

REQUIRES:
Assembly and setup following the design handbook and consisted of
guideline sheet