Traxxas Mounting Plate For Castle Mamba Monster Esc

    This is the Mamba ESC Mounting Plate from Traxxas.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One ESC Mounting Plate
Two 3x35mm Cap Head Screws
Foam Padding

REQUIRES:
Utilize with Castle Creations Mamba ESC

Here is a fantastic thing that many others have actually bought at the same time.

Revo Wheelie Bar Assembled (Fits All Revo Trucks)

This is the optional Assembled Wheelie Bar for all variations
of the Traxxas Revo except the 1/16 E-Revo.

FUNCTIONS:
Nylon construction
Black in color

CONSISTS OF:
One Assembled Wheelie Bar

REQUIRES:
Setup on the Traxxas Revo

This thing praises the main item right here.

Chassis Brace, Rear For Summit E-Revo

This is the Back Chassis Brace for the 1/10 scale Traxxas E-Revo.

FUNCTIONS:
Aluminum construction, blue in color

CONSISTS OF:
Back Chassis Brace
Two 3x35mm Socket Head Screws
One 4x14mm Button Head Screw
Direction Sheet

SPECS:
Length: 5.1" (129mm)

Often bought with the thing that you are currently reviewing.

Summit Led Light Bar- (Chrome, Fits Roll Cage) 4 C Lear Ligh

This is the LED Lightbar with Harness and Adapter for use on the
Traxxas Top Truck RTR

FUNCTIONS:
Plastic construction
Chrome in color
JST Connectors
Clear LED Lights

CONSISTS OF:
4 LED Lights
Two Zip Ties
One Y-Harness
Guidelines

REQUIRES:
Setup on the car

The below thing additionally sets actually well with the thing being reviewed.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Parts for both nitro and electrical Revo and Maxx trucks

CONSISTS OF:
3 Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Recommendations

REQUIRES:
Disassembly of slipper clutch

Lots of others have actually bought this thing along with the thing that you are currently reviewing.

E-Revo Gear Cover Single Motor

This is the optional Single Motor Gear Cover
for the Traxxas E-Revo

FUNCTIONS:
Plastic construction
Black in color

CONSISTS OF:
One Single Motor Gear Cover

REQUIRES:
Setup on the Traxxas E-Revo

COMMENTS:
For the double motor gear cover, order TRAC5677

Often bought with the thing that you are currently reviewing.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Gets rid of the possibility of reverse polarity connections
Low resistance, compact size
Offers a safe and secure connection for battery and motor connections on
    R/C automobiles

CONSISTS OF:
Two WS Deans 2-Pin Female Ultra Plug Connectors with section of
    diminish tubing

REQUIRES:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001

Here is another thing that praises the thing being reviewed.



This is the Mamba Monster 2 25V Electronic Speed Control
and the Neu Castle 1515 1Y 2200kV Motor, from Castle Creations.

FEATURES:
Neu Castle 2200kV Brushless Motor;
Suitable for 1/8 scale beast trucks using SIX LiPO batteries
High quality extra-large ABEC-1 front and rear ball bearings
Sintered Neodymium magnets
6.5mm gold connectors with 10 gauge wires (OK to shorten)
    Mamba Monster 2 25V ESC;
Suitable with on-road, buggies, truggies and beast trucks
    running up to SIX LiPo batteries and weighing approximately 15lbs (6.8kg)
Water resistant design enables running in almost any environment (see
    COMMENTS below)
USB shows capability by means of the Castle Link USB adapter (CSEM6300)
Solder posts allow battery wire length and instructions to be quickly
    changed
One year minimal guarantee through Castle Creations beginning at date
    of purchase. Warranty does not cover abuse, disregard, or damage due
    to inaccurate circuitry, over voltage or overloading

CONSISTS OF:
Mamba Monster 2 25V ESC with Cooling Fan, On/Off Change, Fan Plug,
    Motor Wires, Receiver Wire with Connector and Recommendations
2200KV Neu Castle Brushless Motor with 10 Gauge Leads, Connectors
    and Guidelines

SPECS:
ESC, CSEM0800
Input Voltage: 2S-6S LiPo
BEC: User selectable output between 5 and 7 volts
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.86 x 2.19 x 1.33" (47 x 56 x 34mm)
Weight: 3.93oz (111.5g) without battery port
    Motor, CSEC0400
Max Input Volts: 25.2
Amp Score: 120
Weight: 15oz (424g)
Motor Size: 1.57" (39.98mm)
1.64" (41.78mm) with fins
Motor Length: 2.9" (75.18mm)
Shaft Size: 0.197" (5mm)
Ball Bearings: Oversize ABEC-1 front and rear
Connector: 6.5mm gold

COMMENTS:
Not intended for use while immersed in liquid. Fan on ESC is not
    water resistant. Eliminate fan from ESC prior to exposing car to
    liquids.