Traxxas Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Bad guy IV.
AXY
4/8/92

Several others have purchased this thing along with the thing that you are presently reviewing.

Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Simple installation requires just snapping the fan real estate on the
ESC and plugging in the port on the ESC to the fan

CONSISTS OF:
One Cooling Fan Unit with installation sheet

REQUIRES:
Setup following the consisted of instructions

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Here is a fantastic thing that numerous others have purchased the very same time.

Tqi 2.4Ghz 5-Channel Micro Receiver (W/ Telemetry)

This is the Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry.

FEATURES:
Suitable with all Traxxas designs that include the TQi telemetry
    system
May also be used with all existing Traxxas TQ 2.4GHz transmitters
    with black cases and satin chrome or black steering wheels

CONSISTS OF:
Traxxas TQi 2.4GHz 5-Channel Receiver with Telemetry

SPECIFICATIONS:
Measurements: 1.5 x 1.02 x 0.43" (38 x 26 x 11mm)
Weight: 0.35oz (10g)

You will enjoy this product if you have the product above stated.

Cc Blower 15 Series For 1/8 Motors

This is the Motor Cooling Blower Fan and Shroud from Castle Creations.

FEATURES:
Fits motors with outside size between 1-1/2 and 1-7/8"
    (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650
Plugs into receiver and drops motor temperature as much as 30°
One year limited guarantee through maker start at date of
    purchase

CONSISTS OF:
Fan with wire and port, shroud and 2 zip ties

REQUIRES:
Connecting to motor can and connecteding into receiver

SPECIFICATIONS:
Length: 49mm
Width: 44.5mm
Height: 44.5mm
Wire Length: (9.5")

You will enjoy this product if you have the product above stated.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts allow a wide array of bodies
    to be used consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body install system eliminates metal clips

CONSISTS OF:
Front and Rear Body Mounts and Posts with Mounting Hardware

Several others have purchased this thing along with the thing that you are presently reviewing.



This is a set of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
mounted to Black Desperado Wheels.

FEATURES:
Fits the back of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electrical Stampede and Rustler
front and back of the Stampede 4x4
Chevron design tread for great traction on rough surface
Side tread has a hook design that craters the dirt for outstanding
    side traction
M2 (soft) compound
Nylon building and construction 6 spoke wheel with molded-in beadlock ring

CONSISTS OF:
2 Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Diameter: 2.8" (71mm)
Total Diameter: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm