Traxxas Metal Washers/12

These are 3x6mm Washers from Traxxas.

FEATURES:
Metal building

CONSISTS OF:
(12) Washers

SPECIFICATIONS:
Size: 3x6mm

The listed below item additionally sets truly well with the item being gone over.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Thickness: 0.5mm

Right here is an additional item that compliments the item being gone over.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FEATURES:
Black steel building

CONSISTS OF:
6 steel shoulder screws

SPECIFICATIONS:
Length: 12mm
Size: 3mm

This item compliments the main item below.

Steerng Bellcrnk Screws (R)

These are Replacement Steering Hardware from Traxxas.

FEATURES:
Metal construction.
Chrome draglink shoulder screws with a phillips drive.
Black guiding bellcrank shoulder screws with a hexagon socket drive.
Coarse thread.

INCLUDES:
(2) Bellcrank Screws
(2) Draglink Screws

SPECIFICATIONS:
Bellcrank Size: 3x30mm
Draglink Size: 3x5mm

Lots of others have bought this item along with the item that you are presently checking out.

3 X 15Mm Button Hex Screw (6)

This is a plan of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm

This item compliments the above gone over item.

3 X 20Mm Button Hex Screw (6)

This is a plan of six 3x20mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Utilized on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x20mm button head screw is required

CONSISTS OF:
6 3x20mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 20mm
Size: 3mm

Right here is a wonderful item that many others have purchased the exact same time.

3Mm Nyl Lock Nuts/12

These are 3mm Nylon Locking Nuts from Traxxas.

FEATURES:
Long lasting metal building
Nylon inserts

CONSISTS OF:
(12) Lock Nuts

SPECIFICATIONS:
Size: 3mm

Get this item to boost the one you are reading around.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Metal Building
Silver in Color
Bent for Easy Elimination

CONSISTS OF:
Ten Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Vehicle

Get this item to boost the one you are reading around.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

COMMENTS:
This part will fit both the requirement and XL version of the Rustler
or Stampede.

Want an additional wonderful item to compliment the above pointed out item?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FEATURES:
Pinion gear with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

REQUIRES:
Installation

SPECIFICATIONS:
Outer Size: 14mm (9/16")
Inner Size: 11mm (7/16")

Lots of others have bought this item along with the item that you are presently checking out.

Stub Axle Pins (4)

These are replacement stub axle pins for the Nitro Buggy, Nitro Street, TRX-3,
Rad 2, TRX-1, Hawk 2, and Blue Eagle LS II. These pins slide through the axle
and hold the wheel to the axle.

INCLUDES:
4- stub axle pins

WAJ
1/30/94