Traxxas E Maxx Battery Hold Downs (2)

This is the Replacement Battery Hold Down Set for the Traxxas E-Maxx Truck.
These hold downs screw directly into the chassis.

FEATURES:
Black nylon building
Adhesive backed foam strips
Posts to accomodate either flat packs or side-by-side packs.

INCLUDES:
Two battery pack hold downs
Two 140mm adhesive foam strips
Four 12x45mm adhesive foam strips
Six 10x45mm adhesive foam strips
Four 3mm hold down posts
Two 3mm shoulder screws
Four clips

REQUIRES:
Assembly onto chassis

SPECS:
Length of Battery Hold Downs: 158mm
Length of Hold Down Posts: 22mm
Length of Shoulder Screws: 20.5mm

REMARKS:
If flat packs are being utilized, the two shoulder screws can be utilized
    (one on each hold down) with the battery hold downs inverted so
    that the hold down can merely be swung out of the way to get rid of the
    pack after the other end has actually been unclipped. If side-by-side loads
    utilized, then all four posts with clip holes need to be set up
    so that the hold downs can be entirely eliminated in order to take
    take out the packs.