Traxxas LaTrax Alias Quad RTF 2.4GHz

This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Fly
Latrax Alias Quad-Rotor Helicopter.

FEATURES:
Flight System: Auto-Leveling six axis control that snaps the Alias
    back to level battle when controls on transmitter are launched
Flight Modes: Three, Easy Mode provides full Auto-Leveling, and minimal
    flight angles to keep speed decreased for newbies
    Quick Mode, Automobile leveling still operates, but speed is increased
    and aerobatic maneuvers can be carried out at the press of a button
    Expert Mode disables Automobile Leveling for full manual control
Radio: 2.4GHz, formed like a video game controller, with thumb pads
    set up on gimbals for newbies, for standard pilots, sticks
    are provided and can be easily set up, system likewise has telemetry
    enabled battery fuel gauge and push-button aerobatics
Frame: Molded composite that holds up against effects
Drivetrain: Top mounted, with elevated rotors to avoid tangles
    when landing in yard
Lights: High-intensity LED
Battery: 3.7V 20C discharge score, 650mAh LiPo
Battery Battery charger: USB powered, with 1000mA high, 500mA low charge
    rate
Motors: 4 high-output brushed coreless motors
Rotors: Dyno-tuned to provide optimal thrust and efficiency
Body: Two-piece molded plastic
Vibrant and interchangeable rotor blades, LED lenses, and canopies

INCLUDES:
Latrax Alias Quad-Rotor Helicopter, with Motors, 3.7V LiPo Battery,
    USB Battery charger, four AAA Cells for transmitter, 1.5mm Hex Wrench,
    LED Lights, User's manual, Spare Rotor Blades, Extra Hardware
    and Thumb Sticks

SPECS:
Blade Circle: 14.78" (375.30mm)
Rotor Size: 5.51" (140mm)
Rotor Center Range Diagonal: 9.25" (235mm)
Rotor Center Range Vertical: 6.54" (166.20mm)
Width: 12.07" (306.50mm)
General Height: 1.69" (42.90mm)
Ground Clearance: 0.47" (11.90mm)
General Flight Weight (with Battery): 3.53 oz (100g)
Gear Ratio: 11:78

This thing is regularly purchased with the above discussed thing.

650Mah 3.7V 1-Cell 20C Lipo

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter.

FEATURES:
1ST shrink covered cell

INCLUDES:
3.7V 650mAh 1ST LiPo battery

SPECS:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Density: 0.23" (6mm)

REMARKS:
Charge with the Traxxas USB Battery charger, TRAE2638

This thing is regularly purchased with the above discussed thing.



This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR SC4.18 Short Course Truck from Dromida.

FEATURES:
Chassis: Plastic tub design
Drive: 4 wheel, shaft driven
Motor: M370 super high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and dual rates, and
    2-in-1 water resistant ESC/receiver, water resistant guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Battery charger: AC wall type
Suspension: Completely adjustable independent
Shocks: Oil-filled huge bore composite body, with numerous mounting
    areas
Bumpers: Versatile plastic, mud flaps on rear bumper
Ball Bearings: Full set
Body: Printed and cut
Tires and Wheels: Rubber tires with low triangular shaped tread,
    plastic wheels, silver in color, width: 0.92" (23.5mm), external
    size: 2.2" (56mm), hex size: 0.31" (8mm)
Caster: Non-adjustable, caster/toe-in describes the angle of the
    front suspension when viewed from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind automobile

INCLUDES:
RTR SC4.18 SC Truck with 2.4GHz Radio, Brushed Motor, Printed Body
    four AA Batteries, 7.2V Battery, AC Wall Battery charger, Instructions

SPECS:
Car;
Length: 11.4" (290mm)
Width: 7.5" (190mm)
Height: 4.1" (105mm)
Gear Ratio: 9.5:1
    Body;
Length: 11.1" (283mm)
Width: 7.7" (195mm) at rear wheels, widest point
5.9" (149mm) behind front wheels, narrowest point
Height: 3" (76mm)

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581

For increased speed Dromida provides a Brushless Conversion Package
    (DIDC1150) that consists of a Brushless Motor, 25A ESC and other
    upgraded components. The Dromida TWO 7.4V 1600mAh Battery
    (DIDC1134) is recommended for finest outcomes and highest speed with
    this conversion set.
**Do NOT use LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will harm the LiPo battery.