Traxxas LaTrax Alias Quad RTF 2.4GHz

This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Fly
Latrax Alias Quad-Rotor Helicopter.

FEATURES:
Flight System: Auto-Leveling 6 axis control that snaps the Alias
    back to level fight when controls on transmitter are released
Flight Modes: Three, Easy Mode offers full Auto-Leveling, and limited
    flight angles to keep speed minimized for beginners
    Fast Mode, Auto leveling still functions, but speed is increased
    and aerobatic maneuvers can be performed at journalism of a button
    Specialist Mode disables Auto Leveling for full manual control
Radio: 2.4GHz, shaped like a computer game controller, with thumb pads
    installed on gimbals for beginners, for traditional pilots, sticks
    are provided and can be quickly installed, system likewise has telemetry
    enabled battery fuel gauge and push-button aerobatics
Frame: Molded composite that holds up against effects
Drivetrain: Top mounted, with elevated rotors to avoid tangles
    when landing in grass
Lights: High-intensity LED
Battery: 3.7V 20C discharge score, 650mAh LiPo
Battery Charger: USB powered, with 1000mA high, 500mA low charge
    rate
Motors: Four high-output brushed coreless motors
Rotors: Dyno-tuned to supply maximum thrust and performance
Body: Two-piece molded plastic
Vibrant and interchangeable rotor blades, LED lenses, and canopies

CONSISTS OF:
Latrax Alias Quad-Rotor Helicopter, with Motors, 3.7V LiPo Battery,
    USB Charger, 4 AAA Cells for transmitter, 1.5mm Hex Wrench,
    LED Lights, User's manual, Spare Rotor Blades, Extra Hardware
    and Thumb Sticks

SPECIFICATIONS:
Blade Circle: 14.78" (375.30mm)
Rotor Diameter: 5.51" (140mm)
Rotor Center Range Diagonal: 9.25" (235mm)
Rotor Center Range Vertical: 6.54" (166.20mm)
Width: 12.07" (306.50mm)
Total Height: 1.69" (42.90mm)
Ground Clearance: 0.47" (11.90mm)
Total Flight Weight (with Battery): 3.53 oz (100g)
Gear Ratio: 11:78

This thing is frequently bought with the above pointed out thing.

650Mah 3.7V 1-Cell 20C Lipo

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter.

FEATURES:
1ST shrink wrapped cell

CONSISTS OF:
3.7V 650mAh 1ST LiPo battery

SPECIFICATIONS:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Density: 0.23" (6mm)

REMARKS:
Accused of the Traxxas USB Charger, TRAE2638

This thing is frequently bought with the above pointed out thing.



This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR SC4.18 Short Course Truck from Dromida.

FEATURES:
Chassis: Plastic tub design
Drive: Four wheel, shaft driven
Motor: M370 extremely high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and double rates, and
    2-in-1 water resistant ESC/receiver, water resistant guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Charger: Air Conditioning wall type
Suspension: Totally adjustable independent
Shocks: Oil-filled huge bore composite body, with several mounting
    areas
Bumpers: Flexible plastic, mud flaps on rear bumper
Ball Bearings: Full set
Body: Printed and trimmed
Tires and Wheels: Rubber tires with low triangular shaped tread,
    plastic wheels, silver in color, width: 0.92" (23.5mm), external
    diameter: 2.2" (56mm), hex size: 0.31" (8mm)
Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when seen from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind automobile

CONSISTS OF:
RTR SC4.18 SC Truck with 2.4GHz Radio, Brushed Motor, Printed Body
    4 AA Batteries, 7.2V Battery, Air Conditioning Wall Charger, Guidelines

SPECIFICATIONS:
Vehicle;
Length: 11.4" (290mm)
Width: 7.5" (190mm)
Height: 4.1" (105mm)
Gear Ratio: 9.5:1
    Body;
Length: 11.1" (283mm)
Width: 7.7" (195mm) at rear wheels, best point
5.9" (149mm) behind front wheels, narrowest point
Height: 3" (76mm)

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Back Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Back Uprights 2 DTXC1581

For increased speed Dromida offers a Brushless Conversion Set
    (DIDC1150) that consists of a Brushless Motor, 25A ESC and other
    updated parts. The Dromida 2S 7.4V 1600mAh Battery
    (DIDC1134) is advised for finest results and highest speed with
    this conversion kit.
**Do NOT use LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will damage the LiPo battery.