Traxxas Housings, Differential, Front

This is the Front Differential Housing for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building
Black in color

INCLUDES:
Two front differential housing halves

NEEDS:
Setup around put together differential parts

Many others have actually bought this item in addition to the item that you are presently reviewing.

Housings, Differential, Rear

This is the Back Differential Housing for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building
Black in color

INCLUDES:
Two rear differential housing halves

NEEDS:
Setup around diff parts

Many others have actually bought this item in addition to the item that you are presently reviewing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a terrific item that several others have actually purchased the exact same time.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Building and construction
Blue Rubber Sealed

INCLUDES:
Two 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Car

SPECIFICATIONS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

This item praises the main item below.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to vehicle

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one needed).

This item praises the main item below.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Long lasting steel building
Silver in color

INCLUDES:
4 51.5mm pins
4 30mm pins

NEEDS:
Setup on the Slash 4x4

This is a wonderful addition to the item presently being reviewed.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Suitable with the LGC chassis just**
**will not work with the conventional chassis version of the Slash 4x4.**

FUNCTIONS:
Two-piece design allows front end of vehicle to be removed without
    needing to remove the bellcranks
Side dirt guards blend with the chassis and help secure the
    guiding servo and bellcrank location from dirt
Constructed of engineering grade nylons, black in color

INCLUDES:
Two-Piece Front Bulkhead with Installing Hardware and Direction Sheet

This item praises the above reviewed item.

Drive Hub, Frt, Hardened Steel (1) Screw Pin, (1) Fits Slash

This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4.

FUNCTIONS:
Hardened steel building

INCLUDES:
One Drive Hub
One Screw Pin

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Length: 19mm (0.75")
Diameter: 12mm (0.47")

This item praises the main item below.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with ports

NEEDS:
Setting up in vehicle

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied