Traxxas Housings, Differential, Front

This is the Front Differential Housing for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building and construction
Black in color

CONSISTS OF:
Two front differential real estate halves

REQUIRES:
Setup around assembled differential parts

Several others have acquired this product together with the product that you are currently reading about.

Housings, Differential, Rear

This is the Back Differential Housing for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building and construction
Black in color

CONSISTS OF:
Two rear differential real estate halves

REQUIRES:
Setup around diff parts

Several others have acquired this product together with the product that you are currently reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is a wonderful product that lots of others have bought at the exact same time.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Building and construction
Blue Rubber Sealed

CONSISTS OF:
Two 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Automobile

SPECS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Density: 5mm (0.19")

This product compliments the main item below.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Assembly to automobile

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one required).

This product compliments the main item below.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel building and construction
Silver in color

CONSISTS OF:
Four 51.5mm pins
Four 30mm pins

REQUIRES:
Setup on the Slash 4x4

This is a great addition to the product currently being gone over.

Fr Bulkhead TRA LCG Slash 4x4 Chassis

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Compatible with the LGC chassis only**
**will not deal with the conventional chassis variation of the Slash 4x4.**

FUNCTIONS:
Two-piece design enables front end of automobile to be eliminated without
    needing to remove the bellcranks
Side dirt shields blend with the chassis and aid secure the
    guiding servo and bellcrank area from dirt
Constructed of engineering grade nylons, black in color

CONSISTS OF:
Two-Piece Front Bulkhead with Installing Hardware and Guideline Sheet

This product compliments the above gone over product.

Drive Hub, Frt, Hardened Steel (1) Screw Pin, (1) Fits Slash

This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4.

FUNCTIONS:
Hardened steel building and construction

CONSISTS OF:
One Drive Hub
One Screw Pin

REQUIRES:
Setup on the automobile

SPECS:
Length: 19mm (0.75")
Diameter: 12mm (0.47")

This product compliments the main item below.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

REQUIRES:
Setting up in automobile

SPECS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not offered