Traxxas HOSS 4X4 VXL 1/10 Scale w/TSM Orange

The brand new Hoss 4X4 VXL lets loose extreme monster truck fun with the speed and design just Traxxas can provide. Grab a fistful of throttle and the Velineon 540XL motor delivers enormous torque to wheelie on command and hold the front end high as long as you attempt. Pitch the Hoss into a turn and slide through sideways in a cloud of dirt—all four tires dig in and drive tough no matter how rough the terrain, and the Traxxas Stability Management system keeps you in control. The rugged, reinforced pickup body covers tested performance tech, with Velineon brushless horsepower and sturdy shaft-driven 4WD. The Hoss delivers unmatched versatility as the aggressive Sledgehammer® tires blast through dirt, sand, mud, and snow. Drive harder, go faster, hang harder—famous Traxxas resilience is crafted into every component. Absolutely nothing stops the Hoss!

Model 90076-4: Hoss® 4X4 VXL: 1/10 Scale 4X4 Monster Truck, fully-assembled, waterproof electronics, Ready-To-Race®, with TQi™ 2.4GHz 2-channel radio system, Traxxas Stability Management®, VXL-3s speed control, 540XL brushless motor, and clipless painted ProGraphix® body.
Requires: battery and battery charger.

Numerous others have actually gotten this product together with the product that you are currently reviewing.

5000Mah 11.1V 3-Cell 25C Lipo Battery

5000mAh 11.1V 3-Cell 20C Lipo Battery

TRAXXAS CERTIFIED LIPO POWER! Traxxas Licensed iD-Equipped LiPo batteries are crafted to supply the punch and on-demand power for arriving speeds that Traxxas models are constructed to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are crafted particularly to fit Traxxas models and optimize their full performance potential. Only Traxxas gives you more of what you want most: simple setup, an excellent rate, and the most speed and run time available.

Specifications:

Length: 135mm

Height: 28.5mm

Width: 44mm

Want an additional wonderful product to compliment the above discussed product?

BATT/CHGER COMPLETER 2849

This product is often gotten with the above discussed product.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Functions:
• Consists of radio system, ESC and transmitter batteries
• Consists of motor and on-board LiPo battery
• Reasonable narrow-stance rock crawler body in olive green or red
• Molded roll cage with realistic light bar
• Reasonable driver figure and lots of other scale information
• Officially certified KMC XD229 Machete Crawl wheels
• Officially certified Nitto Path Grappler M/T tires (S30 substance, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts permit for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones supply strength and resilience
• Rugged steel C-channel frame rails with bracing keep everything rigid and lined up
• Front and rear axles include a two-piece, molded plastic strong axle design
• 3-Link front and 4-link rear suspension supply optimal handling
• Coil-over shocks with simulated reservoir and resilient plastic suspension links provide tested Axial crawling performance
• Front and rear differentials each home a worm equipment setup to power the axles and create higher ground clearance. Worm equipment drive likewise supplies a low equipment ratio to decrease torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the very first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the perfect rig to bring on your hiking, camping, and other outside and indoor experiences — offering factory-assembled ease, scale looks, and confident handling on any trail.

Even brand-new modelers driving the SCX24 chassis will be fully equipped to tackle difficult climbs up and rough routes. Like the bigger SCX10™ chassis, this smaller sized variation utilizes lots of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pressing onward and upward.

For the most reputable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and resilient plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that decreases torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt displays proficiency and charm on the routes. Take a look at that Deadbolt body — with its narrow stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar. The realism continues right down to the ground, where you’ll discover certified KMC XD229 Machete Crawl wheels covered in Nitto Path Grappler tires.

Adding even more to its novice appeal, the SCX24 Deadbolt comes 100% total and all set to run. Everything required for action is in package: put together and ended up automobile; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electric motor and 350mAh two 7.4V LiPo battery; USB LiPo battery charger; and even four AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (installed)
    (1) Dynamite® 88T brushed electric motor (installed)
    (1) Axial AS-1 guiding servo (installed)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh Two 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Manual




STEEL C-CHANNEL CHASSIS FRAME RAILS
Much like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and tough steel c-channel frame rails with bracing to keep everything undamaged and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor supplies the right amount of torque to help ascend high climbs up. It's mated to a steel motor install to keep flex to a minimum, which helps secure the gears.
 


WORM GEARS
The front and rear differentials each home a worm screw and worm equipment setup to get the power to the axles and create higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones supply strength and resilience to keep things running throughout difficult climbs up and rough routes.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to permit maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this small scale, the mix of coilover shocks with simulated reservoirs and resilient plastic suspension links delivers the crawling performance you have actually known and expect from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles include a two piece, molded plastic strong axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two intense LED lights are consisted of and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is enhanced to decrease axle steer and torque twist. We have actually likewise consisted of extra suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially certified KMC XD Machete wheels are famous in the off-road world. They are molded in black and function spectacular scale information, regardless of the small scale.
The officially certified Nitto Path Grappler M/T Tires provide a wonderful blend of off-road performance while still retaining outstanding composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system provides simple access to on-board components. You can rapidly reach the battery and chassis by getting rid of just two body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size doesn't mean the features need to do the same. No bushings discovered here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire automobile.
 

AXIAL AS-1 SERVO
Installed just above the front axle is the Axial AS-1 servo, with a servo saver that permits guiding accuracy, while likewise providing protection for the servo gears in the event of a bind or impact.
 

Specs

Type: Spider
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Strong axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo battery charger (consisted of)
Gear Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and trimmed Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No