Traxxas Hex Wheel Hub 2.5 X 12Mm Rustler / Stampede / Slash

This is a Hex Wheel Center Set for the Traxxas Rustler and
Stampede. These parts have actually more balanced out than
the stock hex wheel center set (TRAC6044).

FEATURES:
Gray plastic building and construction

CONSISTS OF:
2 wheel centers
2 2.5mmX12mm axle pins

SPECIFICATIONS:
Hex size: 12mm
Width: .32" (8mm)

Here is a wonderful product that lots of others have bought at the same time.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Several others have acquired this product together with the product that you are currently checking out.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These are situated in the front steering blocks.

FEATURES:
Steel building and construction
Natural color

CONSISTS OF:
2 front axles

REQUIRES:
Nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Diameter: 5mm

COMMENTS:
These will not work for the nitro variations. For that axle, use
    TRAC2536.

This is a great enhancement to the product currently being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly love this thing if you have the thing above stated.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on car

Here is one more product that praises the product being discussed.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Thickness: 0.5mm

This product praises the above discussed product.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building and construction
Black in color

CONSISTS OF:
One left and right steering blocks

REQUIRES:
5x11x4mm bearings (DTXC1547)

Several others have acquired this product together with the product that you are currently checking out.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

CONSISTS OF:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outside diameter: 7mm

Here is one more product that praises the product being discussed.

Oilite Bushings 5X11mm

This is a replacement bushing set for the TRAXXAS TRX-10 BULLET, HAWK2, and
various other TRAXXAS PACKAGES. .
FEATURES:
Made from metal

CONSISTS OF:
14 bushings

SPECIFICATIONS:
5x11mm bushings

COMMENTS:
These bushings would work on any car utilizing 5x11mm bushings.

This product praises the main item here.

Large Servo Saver

This is a big servo saver that can be used in Traxxas vehicles or any car that
requires a big style servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that allow you to mount the saver
on a lot of popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for mounting the guiding linkages.