Traxxas Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

INCLUDES:
Two hex hubs
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These hubs might be used with other automobiles using the exact same
    pin/hex design. These hubs Will Not deal with the T-Maxx or E-Maxx.

This is a superb enhancement to the item currently being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

The below item additionally pairs actually well with the item being talked about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to automobile

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one required).

Want an additional great item to enhance the above discussed item?

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a pair of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building

INCLUDES:
Two Front Driveshafts

This item compliments the above talked about item.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a pair of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building

INCLUDES:
Two Rear Driveshafts

Get this item to enhance the one you read around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide variety of bodies
    to be used suching as rally car bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

INCLUDES:
Front and Rear Body Mounts and Posts with Mounting Hardware

Right here is a great item that several others have bought at the very same time.



This is a set of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
mounted to Black Desperado Wheels.

FEATURES:
Fits the back of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electric Stampede and Rustler
front and back of the Stampede 4x4
Chevron style tread for great traction on rough terrain
Side tread has a hook design that craters the dirt for outstanding
    side traction
M2 (soft) compound
Nylon building 6 spoke wheel with molded-in beadlock ring

INCLUDES:
Two Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Diameter: 2.8" (71mm)
Overall Diameter: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm

Right here is a great item that several others have bought at the very same time.

Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FEATURES:
4 snap-in change positions to manage degree of wheelie action
    quickly detachable if added control isn't really required
Constructed of hardened plastic, black in color

INCLUDES:
Wheelie Bar Arm with 4 Shoulder Screws, TRAC3642

NEEDS:
Securing to chassis

COMMENTS:
For the 3.3 version only.
Does not consist of Wheels and Axles, order TRAC9576 if required.