Traxxas Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

INCLUDES:
Two hex centers
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These centers might be utilized with other automobiles utilizing the very same
    pin/hex design. These centers Will Not work on the T-Maxx or E-Maxx.

This is a great enhancement to the product currently being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

The listed below product likewise pairs truly well with the product being discussed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to vehicle

SPECIFICATIONS:
Inner Size: 10mm
Outer Size: 15mm
Side Density: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one needed).

Want another fantastic product to enhance the above discussed product?

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a pair of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building

INCLUDES:
Two Front Driveshafts

This product compliments the above discussed product.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a pair of optional Back Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building

INCLUDES:
Two Back Driveshafts

Get this product to improve the one you read around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a wide array of bodies
    to be utilized consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body mount system gets rid of metal clips

INCLUDES:
Front and Rear Body Mounts and Publishes with Installing Hardware

Right here is a fantastic product that numerous others have bought at the exact same time.



This is a pair of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
installed to Black Desperado Wheels.

FEATURES:
Fits the rear of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electric Stampede and Rustler
front and rear of the Stampede 4x4
Chevron style tread for good traction on rough terrain
Side tread has a hook design that craters the dirt for outstanding
    side traction
M2 (soft) compound
Nylon building 6 spoke wheel with molded-in beadlock ring

INCLUDES:
Two Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Size: 2.8" (71mm)
General Size: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm

Right here is a fantastic product that numerous others have bought at the exact same time.

Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FEATURES:
4 snap-in modification positions to control degree of wheelie action
    quickly detachable if extra control isn't really needed
Constructed of hardened plastic, black in color

INCLUDES:
Wheelie Bar Arm with 4 Shoulder Screws, TRAC3642

NEEDS:
Securing to chassis

COMMENTS:
For the 3.3 variation only.
Does not such as Wheels and Axles, order TRAC9576 if needed.