Traxxas Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

SUCHES AS:
2 hex hubs
Four axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These hubs might be used with other vehicles using the exact same
    pin/hex design. These hubs Will Not deal with the T-Maxx or E-Maxx.

This is a wonderful enhancement to the thing presently being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

The below thing additionally pairs really well with the thing being reviewed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

SUCHES AS:
2 Ball Bearings

REQUIRES:
Assembly to automobile

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one required).

Want an additional great thing to compliment the above pointed out thing?

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a pair of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building

SUCHES AS:
2 Front Driveshafts

This thing praises the above reviewed thing.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a pair of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building

SUCHES AS:
2 Rear Driveshafts

Get this thing to improve the one you read about.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a wide variety of bodies
    to be used suching as rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

SUCHES AS:
Front and Rear Body Installs and Posts with Installing Hardware

Below is a great thing that several others have actually purchased the exact same time.



This is a pair of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
mounted to Black Desperado Wheels.

FEATURES:
Fits the back of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electrical Stampede and Rustler
front and back of the Stampede 4x4
Chevron design tread for good traction on rough terrain
Side tread has a hook design that craters the dirt for outstanding
    side traction
M2 (soft) compound
Nylon building six spoke wheel with molded-in beadlock ring

SUCHES AS:
2 Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Size: 2.8" (71mm)
Total Size: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm

Below is a great thing that several others have actually purchased the exact same time.

Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FEATURES:
4 snap-in adjustment positions to manage degree of wheelie action
    easily removable if added control isn't required
Constructed of hardened plastic, black in color

SUCHES AS:
Wheelie Bar Arm with 4 Shoulder Screws, TRAC3642

REQUIRES:
Fastening to chassis

REMARKS:
For the 3.3 version only.
Does not such as Wheels and Axles, order TRAC9576 if required.