Traxxas Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum construction

CONSISTS OF:
Two hex hubs
4 axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These hubs might be utilized with other automobiles utilizing the very same
    pin/hex design. These hubs Will Not work on the T-Maxx or E-Maxx.

This is a fantastic enhancement to the thing currently being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

The listed below thing likewise sets actually well with the thing being talked about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to vehicle

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).

Want an additional wonderful thing to enhance the above pointed out thing?

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a set of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel construction

CONSISTS OF:
Two Front Driveshafts

This thing compliments the above talked about thing.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel construction

CONSISTS OF:
Two Rear Driveshafts

Get this thing to improve the one you read about.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a variety of bodies
    to be utilized suching as rally car bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

CONSISTS OF:
Front and Rear Body Installs and Publishes with Mounting Hardware

Right here is a wonderful thing that numerous others have actually bought at the same time.



This is a pair of Pro-Line Masher M2 2.8" All Terrain Front or Rear Tires
installed to Black Desperado Wheels.

FEATURES:
Fits the rear of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electric Stampede and Rustler
front and rear of the Stampede 4x4
Chevron design tread for excellent traction on rough surface
Side tread has a hook design that craters the dirt for excellent
    side traction
M2 (soft) substance
Nylon construction 6 spoke wheel with molded-in beadlock ring

CONSISTS OF:
Two Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECS:
Wheel Diameter: 2.8" (71mm)
Total Diameter: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm

Right here is a wonderful thing that numerous others have actually bought at the same time.

Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FEATURES:
4 snap-in change positions to manage degree of wheelie action
    easily detachable if extra control isn't required
Constructed of solidified plastic, black in color

CONSISTS OF:
Wheelie Bar Arm with 4 Shoulder Screws, TRAC3642

NEEDS:
Fastening to chassis

COMMENTS:
For the 3.3 variation only.
Does not include Wheels and Axles, order TRAC9576 if required.