Traxxas Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want another wonderful item to enhance the above stated item?

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

INCLUDES:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outside diameter: 7mm

This item is often purchased with the above stated item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

The listed below item also sets really well with the item being gone over.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Density: 0.5mm

This item praises the main item here.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on vehicle

Regularly purchased with the item that you are presently reviewing.

Hex Wheel Hub 2.5 X 12Mm Rustler / Stampede / Slash

This is a Hex Wheel Hub Set for the Traxxas Rustler and
Stampede. These parts have actually more offset than
the stock hex wheel center set (TRAC6044).

FEATURES:
Gray plastic building and construction

INCLUDES:
2 wheel hubs
2 2.5mmX12mm axle pins

SPECIFICATIONS:
Hex size: 12mm
Width: .32" (8mm)

This is a wonderful enhancement to the item presently being gone over.

Front Axles (2) (R & S)

This is a Set of Stock Replacement Front Axles for the Rustler and Stampede.
These lie in the front steering blocks.

FEATURES:
Steel building and construction
Natural color

INCLUDES:
2 front axles

REQUIRES:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Size: 5mm

REMARKS:
These will not work for the nitro versions. For that axle, use
    TRAC2536.

Numerous others have purchased this item along with the item that you are presently reviewing.

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building and construction anodized blue in color
Serrated on the back for sure grip

INCLUDES:
4 4mm Flanged Nylon Locknuts

REQUIRES:
6mm nut motorist

SPECIFICATIONS:
Hole Size: 4mm
Hex Size: 6mm

Right here is another item that praises the item being gone over.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 front 39mm (69mm center to center) turnbuckles and direction
    sheet

REQUIRES:
Setup on the vehicle

Regularly purchased with the item that you are presently reviewing.

3 X 15Mm Button Hex Screw (6)

This is a package of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building and construction, Black in color
Used on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm button head screw is required

INCLUDES:
6 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm