Traxxas Half Shaft Set, Long (Plastic

These are the Long Half Shafts for usage on the
Traxxas Summit Truck RTR

FUNCTIONS:
Plastic building
Black in color

CONSISTS OF:
Two Long Half Shaft Sets, internal splined half shafts and external
    half shafts with glued boot

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Length: 130mm (5")
Diameter: 17.3mm (0.68")

This thing is frequently purchased with the above stated thing.

Half Shaft Set, Short (Plastic

These are the Short Half Shafts for usage on the
Traxxas Summit Truck RTR

FUNCTIONS:
Plastic building
Black in color

CONSISTS OF:
Two Short Half Shaft Sets, internal splined half shafts and external
    half shafts with glued boot

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Length: 117mm (4.6")
Diameter: 17.15mm (0.68")

The below thing also sets actually well with the thing being gone over.

Stub Axle, Cv Style (Machined

This is the CV Design Stub Axle for usage on the
Traxxas Summit Truck RTR

FUNCTIONS:
Machined steel building
CV design

CONSISTS OF:
One CV Design Stub Axle
One Cross Pin
One Drive Pin
One Set Screw

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Length: 49mm (1.9")

Want an additional excellent thing to match the above stated thing?

Diff CV Output Drive/Screw Pin/Cross Pin/Drive Pin

This is the Differential CV Output Drive Set for usage on the
Traxxas Summit Truck RTR

FUNCTIONS:
Steel building

CONSISTS OF:
Differential CV Output Drive
Screw Pin with Threadlock
Cross Pin
Drive Pin
Set Screw

REQUIRES:
Setup on the vehicle

This thing is frequently purchased with the above stated thing.

Gear, Locking Differential Out

This is the Locking Differential Ouput Gear for usage on the
Traxxas Summit Truck RTR

FUNCTIONS:
Steel building

CONSISTS OF:
One Locking Differential Output Gear
One Differential Slider
One 3x12mm Screwpin

REQUIRES:
Setup on the vehicle

This thing is frequently purchased with the above stated thing.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building

CONSISTS OF:
Two Output Gears
Two Spider Gears
Spider Gear Shaft and Diff Carrier Support
Guideline Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Here is a excellent thing that many others have actually purchased the very same time.

20-T Pinion Gear 32 Pitch

This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft.

FEATURES:
Silver in color, steel building

CONSISTS OF:
20 Tooth Pinion Gear with 4mmx3.5mm Set Screw

REQUIRES:
Setup on motor shaft

SPECIFICATIONS:
Outer Diameter: 15.5mm (0.61")
Inner Diameter: 5mm (0.20")

You will certainly enjoy this product if you have the product above discussed.

Wheel Wrench, 17Mm Splined

This is the 17mm Splined Wheel Wrench from Traxxas.

FEATURES:
Nylon building, black in color
Suitable with the 17mm splined nuts used on lots of Traxxas cars

CONSISTS OF:
17mm splined wheel wrench

This thing is frequently purchased with the above stated thing.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

CONSISTS OF:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Guideline sheet

REQUIRES:
Two plans needed to complete truck