Traxxas Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Simple setup requires only snapping the fan housing on the
ESC and plugging in the connector on the ESC to the fan

CONSISTS OF:
One Cooling Fan System with setup sheet

NEEDS:
Setup following the consisted of directions

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) including clips - .47" (12mm) not including clips

Numerous others have acquired this thing together with the thing that you are currently reviewing.

Heat Sink Velineon 380 Motor Brushless, Aluminum Blue-Ano

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor.

FEATURES:
Aluminum building, anodized blue in color

CONSISTS OF:
Aluminum Heat Sink with tube of Thermal Paste and Directions

Get this thing to enhance the one you read around.

Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Bad guy IV.
AXY
4/8/92

Numerous others have acquired this thing together with the thing that you are currently reviewing.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brands of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECIFICATIONS:
Length: aprrox. 7/8"

Regularly acquired with the thing that you are currently reviewing.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, layered
Anodized black with white springs
Totally put together

CONSISTS OF:
Four completely put together shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and putting together onto the design

This thing compliments the above reviewed thing.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a variety of bodies
    to be used including rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Mounting Hardware

Numerous others have acquired this thing together with the thing that you are currently reviewing.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is connected directly to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

CONSISTS OF:
One 14 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is only one of 2 which are used on the E-Maxx dual motor
    set-up.

You will certainly enjoy this product if you have the product earlier discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

REMARKS:
Also readily available in Blue (RPMC0705)