Traxxas Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for usage on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon building and construction
Black in color
Fits left or best

CONSISTS OF:
One Totally Assembled Driveshaft Assembly

REQUIRES:
Installation on the automobile

This thing praises the above discussed thing.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Diff Ring Equipment
One Pinion Equipment

REQUIRES:
Installation on the automobile

This thing praises the above discussed thing.

Half Shafts, Left Or Right (1/

These are the Left or Right Half Shafts for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
2 Internal Splined Half Shafts
2 External Splined Half Shafts
Four Metal U-Joints

REQUIRES:
Installation on the automobile

This thing is often acquired with the above discussed thing.

Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for usage on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Battery Compartment Door
2 Vents

REQUIRES:
Installation on the automobile

Regularly acquired with the thing that you are currently checking out.

Pivot Balls (4)/ Pivot Ball Ca

These are the Pivot Balls and Pivot Ball Caps for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel constructed pivot balls
Black nylon pivot ball caps

CONSISTS OF:
Four Pivot Balls
Four Pivot Ball Caps

REQUIRES:
Installation on the automobile's suspension

Regularly acquired with the thing that you are currently checking out.

Wheel Hubs, Hex (4)/ Axle Pins

    These are the Wheel Hubs and Axle Pins for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Four Wheel Hubs
Four 1.5x8mm Axle Pins

REQUIRES:
Installation on the automobile

SPECS:
Hex Size: 12mm

This thing is often acquired with the above discussed thing.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Installation on the automobile

SPECS:
Outer Diameter: 12mm (0.47")
Inner Diameter: 8mm (0.31")
Width: 3.5mm (0.14")

Here is a great thing that lots of others have actually purchased the exact same time.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Red in color

CONSISTS OF:
Four Front/Rear Toe Hyperlinks
Eight Hollow Balls

REQUIRES:
Installation on the automobile

SPECS:
Length: 86mm (3.4")
Diameter: 5mm (0.20")

Want one more great thing to enhance the above discussed thing?

Rocker Arm Set, Progressive-2/

This is the Progressive-2 Rocker Arm Post Set for usage on the
Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
2 Back Rocker Arm Posts
2 Front Rocker Arm Posts
Eight Nylon Bearings

REQUIRES:
Installation on the automobile

Want one more great thing to enhance the above discussed thing?

Gear Set (For 2080 Micro Water

This is the Servo Equipment Set for usage on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon building and construction
Grey in color

CONSISTS OF:
One Output Equipment
One Top Reduction Equipment
One Center Reduction Equipment
One Bottom Reduction Equipment
Guideline sheet

REQUIRES:
Installation on the servo