Traxxas Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This item is often purchased with the above pointed out item.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building

CONSISTS OF:
2 Output Gears
2 Spider Gears
Spider Gear Shaft and Diff Provider Assistance
Direction Sheet

NEEDS:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Frequently purchased with the item that you are presently reading about.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECS:
Inside size: 6mm
Outdoors size: 12mm
Width: 4mm

COMMENTS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

The below item likewise sets truly well with the item being discussed.

Carrier, Differential (Heavy D

This is the Strong Provider Differential for use on the
Traxxas Summit Truck RTR

FUNCTIONS:
Nylon building
Black in color

CONSISTS OF:
One Strong Differential Provider
One Front and Back Linkage Arm
One Differential Fork
2 X-Ring Gaskets
One Ring Gear Gasket
2 Bushings
One 6.5x10x0.5mm Washer

NEEDS:
Installation on the car

Numerous others have purchased this item along with the item that you are presently reading about.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Construction
Blue Rubber Sealed

CONSISTS OF:
2 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Automobile

SPECS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Thickness: 5mm (0.19")

Get this item to boost the one you read around.

Gear, Locking Differential Out

This is the Locking Differential Ouput Gear for use on the
Traxxas Summit Truck RTR

FUNCTIONS:
Steel building

CONSISTS OF:
One Locking Differential Output Gear
One Differential Slider
One 3x12mm Screwpin

NEEDS:
Installation on the car

This item is often purchased with the above pointed out item.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Provider/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Provider
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Provider
2 Blue Rubber Shaft Gaskets
One Black Rubber Diff Provider Gaskets
One Gray Washer

NEEDS:
Assembly to car

Numerous others have purchased this item along with the item that you are presently reading about.

Diff Housing Frnt & Rr Revo

This is the Front and Back Differential Housing
for the REVO from Traxxas.

FEATURES:
Long lasting black nylon building

CONSISTS OF:
One diff housing (2 pieces)

NEEDS:
TRAC5119 10x15mm Bearing (1)
    TRAC5118 8x16mm Bearing (1)
    TRAC5117 6x12mm Bearings (2)
    TRAC5381 Diff Provider & Gasket
    TRAC3965 Cap Head Screw 2.5X8MM
    TRAC2587 Cap Head Screw 3X10MM
    TRAC5329 Rear bulkhead
    TRAC5330 Font style bulkhead

You will enjoy this item if you have the item earlier discussed.

Carrier, Differential Heavy Du

This is the Provider Differential for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Changes used diff carriers gaskets and spacers

CONSISTS OF:
Diff Provider and Gaskets, TRAC5381
Steel Spider Gear Braces (not utilized with Revo)
Direction sheet

NEEDS:
Disassembly of differential, installing new parts and filling up with
    modeler's option of diff lube
10K (TRAC5135) 50K (TRAC5137)
30K (TRAC5136) stock weight Total set (TRAC9136)