Traxxas Xo-1 Connector Power Tab

This is the Power Tap Port for the Traxxas XO-1, TRAD42**.

FUNCTIONS:
Changes busted power tap ports

CONSISTS OF:
Port with Wire and Red 2-Pin Port and Zip Tie

This item praises the main item below.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal building and construction

CONSISTS OF:
2 various plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECIFICATIONS:
Magnet size: 5mm
Magnet thickness: 2mm

The listed below item also pairs really well with the item being reviewed.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature level Sensing unit Mount for the Traxxas TQi Telemetry System.

FEATURES:
For use with electric powered Traxxas automobiles

CONSISTS OF:
Mount, Plastic Tie, and Thermal Pad

This is a superb enhancement to the item currently being reviewed.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Fully assembled
Plastic telescoping driveshaft with steel universals
Blue rubber boot guards telescoping sections from dirt
Connects to the differential with one screw pin
Works on the front or rear, right or left of car

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Direction sheet

NEEDS:
Setting up on chassis

You will love this product if you have the product previously mentioned.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FUNCTIONS:
Stainless-steel bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside size: 6mm (0.24")
Outdoors size: 13mm (0.51")
Width: 5mm (0.20")

Want another excellent item to compliment the above mentioned item?

Sensor Temperature/Voltage Short

This is the Short Temperature level and Voltage Sensing unit from Traxxas.

FEATURES:
Functions with the Traxxas Link system to show battery voltage and
    temperature level

CONSISTS OF:
Short Temperature level and Voltage Sensing unit

SPECIFICATIONS:
Length: 9.5" (241mm)

This is a superb enhancement to the item currently being reviewed.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also called a JST connector.

FEATURES:
Designed for use with a lot of Park Leaflet ElectriFly electronic devices
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality guarantee

CONSISTS OF:
2 Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (general with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female ports with wire, use GPMM3107
This adapter can be utilized to change BEC-type ports.

You will love this product if you have the product previously mentioned.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Direction sheet

NEEDS:
2 bundles had to finish truck