Traxxas Xo-1 Connector Power Tab

This is the Power Tap Adapter for the Traxxas XO-1, TRAD42**.

FUNCTIONS:
Changes busted power tap ports

CONSISTS OF:
Adapter with Wire and Red 2-Pin Adapter and Zip Tie

This thing praises the main item below.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Stimulate Gear/Telemetry Trigger Magnet

FUNCTIONS:
Black plastic and metal construction

CONSISTS OF:
Two various plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECIFICATIONS:
Magnet diameter: 5mm
Magnet thickness: 2mm

The listed below thing also sets truly well with the thing being gone over.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature level Sensor Mount for the Traxxas TQi Telemetry System.

FEATURES:
For use with electrical powered Traxxas vehicles

CONSISTS OF:
Mount, Plastic Tie, and Thermal Pad

This is a fantastic addition to the thing currently being gone over.

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Totally assembled
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping areas from dirt
Connects to the differential with one screw pin
Works on the front or back, right or left of vehicle

CONSISTS OF:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Guideline sheet

NEEDS:
Setting up on chassis

You will enjoy this product if you have the product above mentioned.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for use on the E-Revo

FUNCTIONS:
Stainless Steel bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside diameter: 6mm (0.24")
Outside diameter: 13mm (0.51")
Width: 5mm (0.20")

Want another excellent thing to match the above discussed thing?

Sensor Temperature/Voltage Short

This is the Short Temperature level and Voltage Sensor from Traxxas.

FEATURES:
Functions with the Traxxas Link system to display battery voltage and
    temperature level

CONSISTS OF:
Short Temperature level and Voltage Sensor

SPECIFICATIONS:
Length: 9.5" (241mm)

This is a fantastic addition to the thing currently being gone over.



These are Male 2-Pin Flat Red Connectors with 3" wires.
This is also called a JST connector.

FEATURES:
Developed for use with a lot of Park Flyer ElectriFly electronics
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

CONSISTS OF:
Two Male 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 13mm (total with flanges)
    Width: 5.5mm
    Height: 3mm

COMMENTS:
For the female ports with wire, use GPMM3107
This connector can be utilized to replace BEC-type ports.

You will enjoy this product if you have the product above mentioned.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building
Blue and Black in Color

CONSISTS OF:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Guideline sheet

NEEDS:
Two plans needed to finish truck