Traxxas Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to connect backwards
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Safe positive locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals protect

INCLUDES:
Two black male plastic ports
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

This thing compliments the main item right here.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Only (No Wires).

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to connect backwards
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals protect

INCLUDES:
Two black female plastic ports
Two sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

This thing compliments the above discussed thing.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for usage in much heavier
    cars such as E-Revos or E-Maxx class cars)
USB programming capability by means of Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for usage in almost every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces numerous stock brushed motors
4 magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's choice

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

The listed below thing likewise sets truly well with the thing being discussed.



This is the Hitec X2 Air Conditioner Plus Double Input Battery Charger.

FEATURES:
Charges 1-6 cell LiPo, LiHV, Li-Ion and LiFe batteries
1-15 cell NiCd, NiMH batteries, and 2-20V lead acid batteries
Double inputs with 2 independent circuits
Powered by either 11-18V DC or 100-240V Air Conditioner power sources
10A power supply
0.1-10A adjustable charge present for each port
Each port has independent balancer for lithium cells
Re-Peak mode for NiMH/NiCd Battery, peaks batteries 1-3 times in a
    row to guarantee a full charge
10 programmable profile settings for each channel
Allows remote control by means of mobile phone with optional WiFi module
    (not consisted of), order HRCP4228
Internal balancing circuits
Charge Master software application allows keeping an eye on pack voltage, cell voltage
    and other information by means of computer, along with initiating and
    upgrading firmware
LiPo battery meter
Battery internal resistance meter
One year minimal guarantee from the date of purchase through HITEC
    RCD U.S.A, INC

INCLUDES:
X2 Air Conditioner Plus Double Input Battery Charger, Air Conditioner Power Cord, Universal
    Balancing Board, Balance Adapter, 2 18AWG Charging Cables

REQUIRES:
Air Conditioner input or 11-18V DC input

SPECS:
Charge Current Variety: 0.1-10.0 amps
Optimum Charge Output: Air Conditioner 100W / DC 100W x 2
Air Conditioner Input: 100-240V Air Conditioner
DC Input: 11-18V DC
Overall Charge Circuit Power: 100W Air Conditioner, 200W DC Input
Discharge Current Variety: 10W x 2
Discharge Existing Power: 0.1-5.0A x 2
Current Drain for LiPo Balancing: 200mA per cell
NiCd/NiMH Battery Cell Count: 1-15 cells
Capacity Variety: 100 - 50000mAh
LiPo/LiHV/LiFe/Lilon Cell Count: 1 - 6 cell
pB Battery Voltage: 2-20V
Weight: 2.15lbs (975g)
Measurements: 6.42 x 6.02 x 2.83" (163 x 153 x 72mm)