Traxxas Chassis Brace, Rear For Summit E-Revo

This is the Rear Chassis Brace for the 1/10 scale Traxxas E-Revo.

FEATURES:
Aluminum construction, blue in color

CONSISTS OF:
Rear Chassis Brace
Two 3x35mm Socket Head Screws
One 4x14mm Button Head Screw
Guideline Sheet

SPECS:
Length: 5.1" (129mm)

This product compliments the above talked about product.

Mounting Plate For Castle Mamba Monster Esc

    This is the Mamba ESC Mounting Plate from Traxxas.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One ESC Installing Plate
Two 3x35mm Cap Head Screws
Foam Cushioning

NEEDS:
Use with Castle Creations Mamba ESC

This product is often purchased with the above pointed out product.

Summit Led Light Bar- (Chrome, Fits Roll Cage) 4 C Lear Ligh

This is the LED Lightbar with Harness and Adapter for usage on the
Traxxas Top Truck RTR

FEATURES:
Plastic construction
Chrome in color
JST Connectors
Clear LED Lights

CONSISTS OF:
Four LED Lights
Two Zip Ties
One Y-Harness
Directions

NEEDS:
Setup on the vehicle

Right here is a fantastic product that many others have actually purchased the very same time.

Revo Wheelie Bar Assembled (Fits All Revo Trucks)

This is the optional Assembled Wheelie Bar for all variations
of the Traxxas Revo other than the 1/16 E-Revo.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Put together Wheelie Bar

NEEDS:
Setup on the Traxxas Revo

Right here is a fantastic product that many others have actually purchased the very same time.

Body Mount Posts, Front & Rear

These are the Tall Front and Rear Body Mount Posts for usage on the
Traxxas Top Truck

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
Front and Rear Body Mount Posts

NEEDS:
Setup on the vehicle

Get this product to boost the one you are reading around.

Wheelie Bar Blue W/Rbbr Wheels

These are the Rubber Tires and Wheels for the
Wheelie Bar on the Traxxas Maxx and Jato Wheelie Bars.

FEATURES:
Machined blue aluminum ball bearing equipped wheels
Rubber Tires

CONSISTS OF:
Two rubber tires, four 5x8mm ball bearings, two blue aluminum wheels

NEEDS:
Attaching to wheelie bar

Right here is a fantastic product that many others have actually purchased the very same time.

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Rear Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

CONSISTS OF:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

NEEDS:
Setup on the Traxxas Revo

Right here is an additional product that compliments the product being talked about.

40Wt Silicone Shock Oil, 2Oz

This is a bottle of ASSOCIATED silicone shock oil utilized with oil shocks.

FEATURES:
100% pure silicone oil
Will not thin out in heat or thicken up in cold weather

CONSISTS OF:
One bottle of silicone oil

SPECS:
40wt (the higher the weight number the thicker the oil)
2 oz. bottle

Right here is an additional product that compliments the product being talked about.



This is the Mamba Beast 2 25V Electronic Speed Control
and the Neu Castle 1515 1Y 2200kV Motor, from Castle Creations.

FEATURES:
Neu Castle 2200kV Brushless Motor;
Ideal for 1/8 scale beast trucks utilizing 6S LiPO batteries
High quality oversized ABEC-1 front and rear ball bearings
Sintered Neodymium magnets
6.5mm gold connectors with 10 gauge wires (OK to reduce)
    Mamba Beast 2 25V ESC;
Compatible with on-road, buggies, truggies and beast trucks
    adding to 6S LiPo batteries and weighing as much as 15lbs (6.8kg)
Water resistant design enables running in almost any environment (see
    COMMENTS below)
USB shows ability through the Castle Link USB adapter (CSEM6300)
Solder posts permit battery wire length and direction to be easily
    altered
One year minimal service warranty through Castle Creations starting at date
    of purchase. Warranty does not cover abuse, neglect, or damage due
    to inaccurate electrical wiring, over voltage or overloading

CONSISTS OF:
Mamba Beast 2 25V ESC with Cooling Fan, On/Off Change, Fan Plug,
    Motor Wires, Receiver Wire with Port and Recommendations
2200KV Neu Castle Brushless Motor with 10 Gauge Leads, Connectors
    and Directions

SPECS:
ESC, CSEM0800
Input Voltage: 2S-6S LiPo
BEC: User selectable output between 5 and 7 volts
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.86 x 2.19 x 1.33" (47 x 56 x 34mm)
Weight: 3.93oz (111.5g) without battery port
    Motor, CSEC0400
Max Input Volts: 25.2
Amp Rating: 120
Weight: 15oz (424g)
Motor Size: 1.57" (39.98mm)
1.64" (41.78mm) with fins
Motor Length: 2.9" (75.18mm)
Shaft Size: 0.197" (5mm)
Ball Bearings: Oversize ABEC-1 front and rear
Port: 6.5mm gold

COMMENTS:
Not intended for usage while immersed in liquid. Fan on ESC is not
    water resistant. Get rid of fan from ESC before exposing vehicle to
    liquids.