Traxxas Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building and construction

SUCHES AS:
2 Blocks

REQUIRES:
Traxxas Rustler or Stampede

Lots of others have actually acquired this thing together with the thing that you are currently reading about.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

SUCHES AS:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Lots of others have actually acquired this thing together with the thing that you are currently reading about.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

SUCHES AS:
One left and ideal steering obstructs

REQUIRES:
5x11x4mm bearings (DTXC1547)

This is a wonderful enhancement to the thing currently being gone over.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Resilient steel construction

SUCHES AS:
2 48mm pins
2 34mm pins
2 30mm pins
2 28mm pins
2 25mm pins

REQUIRES:
Setup on the Rustler, Stampede or Outlaw

COMMENTS:
For a total suspension pin set order TRAC4940

Here is one more thing that praises the thing being gone over.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

SUCHES AS:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with adapters

REQUIRES:
Setting up in car

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not offered

This is a wonderful enhancement to the thing currently being gone over.

Steering Blocks (R & S)

These are the Steering Blocks for the initial
Traxxas Stampede and Rustler trucks. They are made from black strengthened nylon
and are what the front axles go through.

PACKAGE
SUCHES AS: 2 steering blocks (one left and one right)

Not for the Nitro Stampede, or Stampede VXL

Here is a excellent thing that numerous others have actually purchased the very same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Thickness: 1/4"
Width at base: 2 3/4"
Width at top: 2"

SUCHES AS:
(1) Front shock tower for the Traxxas Stampede

This thing praises the above gone over thing.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated construction

SUCHES AS:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outside size: 7mm

Want one more excellent thing to match the above pointed out thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)