Traxxas Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Construction

SUCHES AS:
2 Blocks

NEEDS:
Traxxas Rustler or Stampede

Many others have acquired this item together with the item that you are presently reviewing.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made of stainless steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

SUCHES AS:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Many others have acquired this item together with the item that you are presently reviewing.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

SUCHES AS:
One left and right steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

This is a superb enhancement to the item presently being discussed.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel building

SUCHES AS:
2 48mm pins
2 34mm pins
2 30mm pins
2 28mm pins
2 25mm pins

NEEDS:
Setup on the Rustler, Stampede or Outlaw

REMARKS:
For a complete suspension pin set order TRAC4940

Below is another item that praises the item being discussed.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

SUCHES AS:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

NEEDS:
Installing in vehicle

SPECS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not supplied

This is a superb enhancement to the item presently being discussed.

Steering Blocks (R & S)

These are the Steering Blocks for the original
Traxxas Stampede and Rustler trucks. They are made from black reinforced nylon
and are exactly what the front axles go through.

PACKAGE
SUCHES AS: 2 steering blocks (one left and one right)

Not for the Nitro Stampede, or Stampede VXL

Below is a wonderful item that many others have bought at the exact same time.

Shock Tower Front Bandit / Slash / Stampede / Rustler

This is a stock replacement FRONT shock tower for the Traxxas Stampede.

FEATURES:
Made from black molded nylon
For the Traxxas Stampede

SPECS:
Height: 2 3/4"
Density: 1/4"
Width at base: 2 3/4"
Width at top: 2"

SUCHES AS:
(1) Front shock tower for the Traxxas Stampede

This item praises the above discussed item.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building

SUCHES AS:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outdoors diameter: 7mm

Want another wonderful item to enhance the above mentioned item?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)