Traxxas Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FUNCTIONS:
Fastens to front skidplate and holds front diff in place
Gray in color, built of solidified plastic

CONSISTS OF:
Left and Right Front Bulkheads for the T-Maxx 3.3

REQUIRES:
Attaching to skidplate and differential

REMARKS:
For the 3.3 variation just.

Want an additional excellent item to enhance the above pointed out item?

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930
and provides defense to the front differential.

FEATURES:
Skidplate is built of high effect molded black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or tough landings from jumps.
Stainless steel mounting plate provides stiff mounting surface.

INCLUDES:
One plastic front skidplate
One stainless steel mounting plate.

REQUIRES:
Installing on chassis with four 3x10mm countersunk device screws
    (not included, utilize TRAC3277).

Get this item to enhance the one you read about.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Steel construction
Silver in color

CONSISTS OF:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

This item compliments the above gone over item.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle carriers and shocks
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

REQUIRES:
Attaching to chassis

REMARKS:
For the 3.3 variation just. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

This is a wonderful addition to the item currently being gone over.

Skidplate Frt Grey

This is the Front Plastic Skidplate for the T-Maxx 3.3.

FUNCTIONS:
Connect to and secures chassis and supports the front bulkhead
Skidplate is gray in color

CONSISTS OF:
Skidplate and stainless steel plate

REQUIRES:
Installing on chassis with four 3x12mm countersunk device screws
    (not included, utilize TRAC2552

REMARKS:
For the 3.3 variation just. For the initial T-Maxx Skidplate, order
    TRAC4037.

Regularly acquired with the item that you are currently reviewing.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon construction

CONSISTS OF:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

REQUIRES:
Other shock parts

SPECS:
Size Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The below item also pairs really well with the item being gone over.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on the end of the stub axles.

FEATURES:
Replaces missing out on or harmed hex wheel hubs
Hubs are made from molded black plastic
Axle pins are steel

CONSISTS OF:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

REQUIRES:
Inserting pins through stub axles (4953) and putting wheel hubs in
    recessed location of axle carriers (4932).