Traxxas Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon building and construction
Helps prevent the body mount hole from breaking prematurely
White in color

SPECS:
Outer Diameter: 0.87" (22mm)
Inner Diameter: 0.26" (6.7mm)

INCLUDES:
8 big body mount washers

Lots of others have actually purchased this thing in addition to the thing that you are currently checking out.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural polished color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

Here is a great thing that lots of others have actually purchased the exact same time.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be utilized on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

INCLUDES:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

Want another great thing to enhance the above mentioned thing?

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Building
Silver in Color
Bent for Easy Elimination

INCLUDES:
10 Bent Silver Metal Body Clips

NEEDS:
Assembly onto Automobile

Here is another thing that praises the thing being gone over.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Heavy Duty Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic building and construction

INCLUDES:
2 Ouput Yokes
2 Screw Pins

Want another great thing to enhance the above mentioned thing?

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on automobile

You will certainly enjoy this thing if you have the thing previously mentioned.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Want another great thing to enhance the above mentioned thing?

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

INCLUDES:
One 13 tooth Pinion Gear
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is just one of 2 which are utilized on the E-Maxx double motor
    set-up.

Get this thing to enhance the one you read around.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

INCLUDES:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This thing praises the above gone over thing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93