Traxxas Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon building and construction
Assists avoid the body install hole from splitting prematurely
White in color

SPECIFICATIONS:
Outer Size: 0.87" (22mm)
Inner Size: 0.26" (6.7mm)

INCLUDES:
Eight big body install washers

Many others have gotten this thing in addition to the thing that you are presently reviewing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural sleek color

INCLUDES:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

Below is a excellent thing that several others have bought at the exact same time.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brands of cars.

FEATURES:
Metal clips are silver in color

INCLUDES:
Twelve body clips

SPECIFICATIONS:
Length: aprrox. 7/8"

Want an additional excellent thing to compliment the above mentioned thing?

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Construction
Silver in Color
Bent for Easy Elimination

INCLUDES:
Ten Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Vehicle

Below is an additional thing that compliments the thing being gone over.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Sturdy Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic building and construction

INCLUDES:
2 Ouput Yokes
2 Screw Pins

Want an additional excellent thing to compliment the above mentioned thing?

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on automobile

You will certainly love this thing if you have the thing previously pointed out.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Want an additional excellent thing to compliment the above mentioned thing?

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

INCLUDES:
One 13 tooth Pinion Equipment
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of two which are used on the E-Maxx double motor
    set-up.

Get this thing to improve the one you read about.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for usage with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

INCLUDES:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This thing compliments the above gone over thing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93