Traxxas Body Washers (8)

This is the Traxxas replacement Body Washers.

FEATURES:
Nylon construction
Helps avoid the body install hole from splitting prematurely
White in color

SPECS:
Outer Diameter: 0.87" (22mm)
Inner Diameter: 0.26" (6.7mm)

CONSISTS OF:
Eight big body install washers

Numerous others have actually purchased this thing in addition to the thing that you are presently reading about.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel construction
Natural sleek color

CONSISTS OF:
Twelve Body Clips

SPECS:
Length: 26mm

Below is a great thing that lots of others have actually bought at the very same time.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be utilized on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

Want another great thing to match the above stated thing?

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Metal Building
Silver in Color
Bent for Easy Elimination

CONSISTS OF:
Ten Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Automobile

Below is another thing that compliments the thing being talked about.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Strong Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic construction

CONSISTS OF:
2 Ouput Yokes
2 Screw Pins

Want another great thing to match the above stated thing?

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on vehicle

You will certainly like this item if you have the item previously stated.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Want another great thing to match the above stated thing?

13T Pinion Gear 32P

This is a 13 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

CONSISTS OF:
One 13 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is only one of 2 which are utilized on the E-Maxx double motor
    set-up.

Get this thing to boost the one you read about.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This thing compliments the above talked about thing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93