Traxxas Body Slash Dakar Truck Series Black/Wing

This is the Dakar Racing Truck Body for the 1/10 scale Traxxas Slash.

FEATURES:
Formed from lexan
Trimmed and painted black with red, white and orange sponsor logo designs

INCLUDES:
Dakar Racing Truck Body

SPECIFICATIONS:
Length: 21.1" (535mm)
Width: 10.5" (268mm)
Height: 5.3" (135mm)

Want an additional fantastic item to compliment the above stated item?



This is the Robby Gordon Short Course 1/10 scale Body
for the Traxxas 4x4 Slash and Slayer.

FEATURES:
Polycarbonate building and construction, cut and all set to set up
Painted orange with all body trim and sponsor decals used to
    reproduce the Robby Gordon #7 Amsoil truck

INCLUDES:
Robby Gordon Short Course 1/10 scale Body with Decal Sheet

SPECIFICATIONS:
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

This item is often acquired with the above stated item.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide variety of bodies
    to be utilized including rally automobile bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

INCLUDES:
Front and Rear Body Mounts and Posts with Installing Hardware

The listed below item also pairs truly well with the item being gone over.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a wide variety of bodies
    to be utilized including rally automobile bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

INCLUDES:
Front and Rear Body Mounts and Posts with Installing Hardware

This item compliments the main item right here.



This is the Sidewinder SCT ESC and 3800kV Motor Combination from Castle Creations.

FEATURES:
Ideal for 2WD or 4WD short course racing or yard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% greater power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Developer Vehicle Card
    (CSEM6300) needed, not included)
Proportional brake with reverse lockout
Water resistant*

INCLUDES:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Directions

REQUIRES:
Battery connector of modeler's option

SPECIFICATIONS:
ESC
Input Voltage: Maximum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery connector
    Motor:
Pole Count: 4
Stator Lamination Thickness: 0.0078" .2mm
Bearings: CNC ranked Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

REMARKS:
*Not meant for operation while immersed in liquid. If device is
    run in wet conditions, wash with fresh water to remove dirt
    or corrosives, then totally dry unit.
Maximum recommended car weight is 6.5lbs (2.95kg)