Traxxas Battery Hold-Downs, Tall (2) (Allows For Installation Of Taller

This is the Battery Hold-downs and Tall Retainers
for the Traxxas 1/10 Rally VXL rally car

FUNCTIONS:
Made from black plastic.

INCLUDES:
One battery hold-down
One tall front hold-down retainer
One tall rear hold-down retainer

SPECS:
hold-down, length: 7-5/8" (194mm)
width: 1-1/4" (32mm)
height: 3/8" (10mm)
front retainer, length: 46mm (1-13/16")
width: 50mm (2")
thickness: 8.5mm (5/16")
rear retainer, length: 48mm (1-7/8")
width: 42mm (1-5/8")
thickness: 17mm (11/16")

REMARKS:
The tall hold-down retainers enable the use of taller,
multi-cell batteries.

Frequently purchased with the item that you are presently reviewing.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale car applications
Prewired with Traxxas high existing adapter

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

NEEDS:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 11.1V
Ranked Capacity: 5000mAh
Discharge Rating: 25C constant
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 56Wh

REMARKS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or puncture cells
NEVER put on flammable materials or leave ignored during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

This item is frequently purchased with the above pointed out item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This is a fantastic addition to the item presently being reviewed.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

NEEDS:
Setup on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

REMARKS:
Likewise offered in Black (RPMC0702)

The below item also pairs truly well with the item being reviewed.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube needed)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to link in reverse
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protected positive locking spring crammed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

CONSISTS OF:
2 black male plastic connectors
2 sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins