Traxxas Attachment Screws

    This is a Plan of 3x12x5mm Shoulder Screws for many
Traxxas Vehicles.

FEATURES:
Black steel construction
Screws are half-threaded/half-smooth
Phillips head

CONSISTS OF:
Six 3x12x5mm shoulder screws

SPECIFICATIONS:
Length: 12mm (.47")
Size: 3mm (.12")
Thread Length: 5mm (.20")

Get this item to improve the one you read around.

Shock Tower

This is the Shock Tower for the all variations of the Traxxas T-Maxx.
This is for rectangular body posts.

FEATURES:
Plastic construction

CONSISTS OF:
(1) Shock Tower

NEEDS:
Installation

SPECIFICATIONS:
Width: 4.15" (105.5mm)
Height: 2.3" (58.5mm)
Thickness: 0.323" (8.2mm)

Right here is a wonderful item that lots of others have purchased the same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Often purchased with the item that you are presently reviewing.

Bulkhead Crossbrace

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx.
These Braces are located in between the bumper mounts.

FEATURES:
Black nylon construction

CONSISTS OF:
2 Bulkhead Cross Braces
8 3x25mm round head screws

NEEDS:
Installation onto and E-Maxx.

SPECIFICATIONS:
Mounting holes on-center: 19mm
Bulkhead width: 29mm
Bulkhead height: 28mm

Many others have purchased this item along with the item that you are presently reviewing.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are built of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
2 3mm x 46mm screw pins
2 3mm x 40mm screw pins
2 3mm x 29mm screw pins
2 2mm x 27mm screw pins
2 2mm x 24mm screw pins

This item is often purchased with the above mentioned item.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
2 Front bearing (hub) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Often purchased with the item that you are presently reviewing.

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum construction anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
4 4mm Flanged Nylon Locknuts

NEEDS:
6mm nut motorist

SPECIFICATIONS:
Hole Size: 4mm
Hex Size: 6mm

This is a wonderful enhancement to the item presently being gone over.

4X12mm Screws Cntrsnk (Hex Drive) (6)

These are the Traxxas Countersunk 4 x 12mm Screws.

FEATURES:
Metal construction
Black in color

CONSISTS OF:
Six 4 x 12mm Countersunk Flathead Hex Screws

NEEDS:
Installation on the automobile

The below item additionally pairs really well with the item being gone over.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Likewise called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97