Traxxas 8400Mah 11.1V 3-Cell 25C Lipo

This is the Traxxas Power Cell 11.1V 8400mAh 25C THREE LiPo Battery.

FEATURES:
Semi stiff building and construction does not require a difficult case and removes
    wire harness connectors that can loosen up and fail
Engineered particularly to fit Traxxas models
12AWG multi hair wire is soldered directly to the LiPo cells
    eliminating increased resistance from bullet connectors and
    unintentional reversed polarity connections

CONSISTS OF:
Traxxas Power Cell 11.1V 8400mAh 25C LiPo THREE Battery with High
    Existing Adapter and JST/XH Balance Plug

NEEDS:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235
LiPo charging bag

SPECIFICATIONS:
Setup: 3S2P
Continuous Discharge: 25C (210A)
Max Burst Rate: 50C (420A)
Watt Hours: 93.24
Charge Rate: 1C (8.4A)
Max Charge Rate: 2C (16.8A)
Dimensions: 6.1 x 1.7 x 1.8" (155 x 44 x 45mm)
Weight: 21.7oz (615g)

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER take apart or customize pack wiring in any way or leak cells
NEVER put on combustible materials or leave ignored throughout
    charging
ALWAYS Charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids

The listed below product additionally sets truly well with the product being talked about.

Adapter Traxxas ID LiPo Battery

This is the Traxxas iD LiPo Battery Adapter.

FEATURES:
Connects Traxxas iD LiPo batteries to LiPo chargers with different
    balance ports

CONSISTS OF:
iD LiPo Battery Adapter with THREE Balance Port
Adapter with TWO Balance Port

SPECIFICATIONS:
Length: 5.2" (132mm) consisting of connectors

This product compliments the above talked about product.



This is the 2.4GHz Radio Controlled, Brushless Electric Powered,
Ready to Run Traxxas X-Maxx.

Innovative New Characteristic Include;

**Unique Self-Righting Action, if car rolls upside down**
**just press a button on the transmitter and most of the times**
**the X-Maxx will flip upright onto its wheels.**

**One handed body mount and elimination system**
**removes body posts and pins.**

**Battery Retention System removes body clips or hook and loop straps**

**Shock towers also serve as bring handles and level supports**
    **when car is placed upside down for upkeep.**

**Added Technical Details Will Be Included When It Appears.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic elements to control wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    great tuned or switched off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Composite nylon tub, modular design supplies simple access
    to vital elements, lower front and rear skids and incorporated
    nerf bars for front, rear and side impact security
Drive 4 wheel shaft drive, high-strength steel CV driveshafts with
    splined wheel hexes that remove axle pins, aluminum splined
    center driveshaft
Brushless Motor: Velineon 1600, 4 pole 1600Kv, 5mm shaft, aluminum
    heat sink
Motor Mount: Cradle design removes flexing, keyed pins lock gear
    mesh in location
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry ready
    receiver, BEC voltage and motor temperature level sensing units installed,
    self righting button, built-in fail safe,
    can be geared up with the TQi Docking Base together with the iPhone,
    iPad or iPod touch* to develop a graphical user interface for the
    car Traxxas Link TQi Wireless Module needed (not included)
Steering Servo: High-torque with aluminum heat sink, double shear
    bearing supported servo horn
Electronic Speed Control: Velineon VXL-6s 6S LiPo compatible
Transmission; Single speed
Differentials: Sealed hardened steel bevel, oil filled, restricted slip
Slipper Clutch: Double fan cooled
Battery Retention System: Integrated into chassis top brace for
    higher rigidness, removes body clips or hook and loop straps,
    adjustable for different batteries
Body: ProGraphix painted and cut
Body Mount System: Quick one-hand body setup and elimination,
    pivoting rear lock system removes body posts and clips
Suspension: Captured high-strength steel pins, double sheer
    connections, adjustable roll center
Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps
    shafts clean reducing seal wear
Shock Towers: Composite plastic building and construction, also serve as bring
    handles and level supports when car is placed upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4"
    foam inserts
Wheels: 4.3x5.7 inches (110x145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with impact cushions
    behind each bumper to soften blows and contribute to sturdiness
Ball Bearings: Sealed, complete contact
Radio Box: Water resistant

CONSISTS OF:
RTR X-Maxx Truck with Brushless Motor, Radio, ESC, Painted Body,
    Quick Start Guide and Upkeep Tools

NEEDS:
Batteries: Two THREE LiPo 5000mAh or higher
Battery Battery charger: Suitable with picked LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag

SPECIFICATIONS:
Car;
Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) distance from external edges of wheels
    measured side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1lbs (8.66kg)
Trip Height: 13.79" (350mm)
General Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)
    Body;
Length:
Width:
Height:

COMMENTS:
Available in the following colors;
    Blue, TRAD75BB
    Red, TRAD75RR

For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set